How to open a safe?

I thought the same!!

Whats the chances anything in it? Does it rattle and hum?

Here we go again...hold on tight! 😁

No Default, is there a name on the safe? Do you have a stethoscope?

You need to hire a proper locksmith that can open this kind of safe. No point asking a bunch of people on the internet with an interest in DIY.

You could always ship it to the lock picking lawyer.

Do you think someone will pay you an extra grand because your safe is in working order?

No? Then drill it and leave it that way.

Dial to zero.

Anti clockwise, pass 1 twice, stop on third.

Then clockwise, pass 1 once stop on second.

Anti clockwise, stop on 1 , then clockwise till it clicks open.

If it doesn't open , just repeat , changing the 1s to random numbers until it opens.

If it's a 4 number combination then it might a little longer.

Hate to break it to you the safes not worth much, looks like an old milner or similar they have NO insurance rating, Thats why alot of them went for scrap or larger ones were turned into gun cabinets

Safe is maybe worth 200...

No! He's only supposed to blow the bloody doors off!!

No point cutting the hinges. Unless the safe is of Argos quality the lock mechanism will have shooting bolts that go out into the frame.

If you want to preserve the door of the safe, then pull the safe out side, turn it onto its roof and get a fella with an oxy-acetylene torch or an angle grinder to cut a good sized hole in the base. Often they are double skinned, with a concrete infill between the skins. So then you cut out the outer layer, then break out the concrete with a kango, and cut the inner steel.

You can weld the cut sections back into place if you want to keep or sell the safe as an ornament.

Ultimately, I doubt there is anything in it. Usually these safes have fúck all in them, or just a load of old crap. The ones you see on youtube are all just staged setups.