2012 McCormick CX110: a few issues

Melodeon · 19-09-2022 04:18PM #1

A neighbour recently bought a 2012 McCormick CX110, and this mystery dashboard symbol has appeared.

He has no owner's manual of course, and a bunch of Googling has been unfruitful too 😕

Anyone here got any idea what it means?

19-09-2022 05:16PM

Probably means 4 wheel drive is turned on.

Melodeon · 19-09-2022 05:37PM

https://www.boards.ie/discussion/comment/119638472#Comment_119638472

That makes sense now, looking at again!

I'll get him to find the 4x4 switch and see what happens 😅

19-09-2022 06:45PM

https://www.boards.ie/discussion/comment/119638561#Comment_119638561

I only say that because this is the symbol off a Deere for 4wd, fairly close.

Melodeon · 19-09-2022 09:41PM

Fantastic, the 4x4 switch it was!

Thanks for the guidance.

While I'm here, there's apparently another issue:

There's a shuttle selector lever to the left of the steering column that's misbehaving a bit.

Forward and Neutral are fine, but Reverse is a bit flakey, having to be gently finessed to get it to actually engage reverse.

Does this ring any bells for anyone?

alan10 · 20-09-2022 02:44PM

This may not be same – as forward & neutral are OK with you.

But we had sim issue: turned out it was the seat sensor if I remember correctly. There has to be weight (a body) on the seat before you can select forward/reverse. Ours was flaky – turns out one of the wires got pinched under the seat. New strip connector, insulator tape and away we go…

2012 McCormick CX110: a few issues

Comments