Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

My autonomous lawn mower thread/blog

1116117119121122181

Comments

  • Registered Users, Registered Users 2 Posts: 12,336 ✭✭✭✭KCross


    And if you get a second mower will you be able to get power to that second location without cutting the driveway?



  • Registered Users, Registered Users 2 Posts: 34,412 ✭✭✭✭listermint


    Very thin slot with diamond blade around 15 to 20mm. Then pour bitumen over it on top. Same as would have for a commuter road. Clean job very minimal cost.



  • Registered Users, Registered Users 2 Posts: 1,215 ✭✭✭worlds goodest teecher


    Looking to go the robot route for my front lawn. I explored this the year before last but decided against it because I have a fence between front and back, and didn't want to cut a hole in it. Ended up buying an Ego self propelled mover instead.

    I now just want a robot for the front lawn (200 - 250sq.m). Gentle slope with a 2.5m wide slope 30 - 40 degrees at the front, but the slope could be cut with the regular mower.

    The lawn surface is bumpy with little pockets from horses in the lawn before we bought the house. Grass is quite tough in places and there is a lot of moss, which we are trying to address.

    Using a strimmer I want to setup the boundary wire by outlining the boundary wire position with string, cut a trench an inch or so deep and laying the wire into it.

    I have no boundary fence at the front so it would be easy to steal it. I need some sort of GPS. I live in a very exposed coastal area.

    Although the Ego lawnmower is fine, I have a disability and carting bags of grass around is too much, I need a robot. I am leaning towards Landroid or Landxcape, and I am familiar with my robot center. Its a simple lawn and I need to keep costs as low as possible.

    Does anyone have any recommendations?



  • Registered Users, Registered Users 2 Posts: 713 ✭✭✭bunderoon


    On the point of lawn pockets, from what I've seen on youtube, you'd want to rectify those first or else the robot will keep getting stuck and can dig up your garden.



  • Registered Users, Registered Users 2 Posts: 8,137 ✭✭✭MrMusician18


    https://www.youtube.com/watch?v=BSF04i3zNGw saw this on YouTube and I have to say it looks very interesting. Openmow uses raspberry pi and rtk GPS to do without the need for buried guide wires. It can therefore work with several distinct lawns.

    There was also a suggestion that they might incorporate a garage door opener so that it could live inside.

    All very interesting for the tinkerers amongst us.



  • Advertisement
  • Registered Users, Registered Users 2 Posts: 133 ✭✭freddie_


    Just wondering if anyone is waiting on a Landroid S300 from myrobotcentre? My Flymo 1200r died recently and have an order put in for the Landroid but where once they gave an expected delivery date ,now it just says out of stock! They have taken money which is annoying. They are quick replying but are not giving much information away!

    Is there any other good EU site worth buying from if you cancel your order?



  • Registered Users, Registered Users 2 Posts: 12,949 ✭✭✭✭DrPhilG




  • Registered Users, Registered Users 2 Posts: 12,949 ✭✭✭✭DrPhilG


    I wouldn't call a concrete drive with a line of bitumen running across it clean.



  • Registered Users, Registered Users 2 Posts: 5,108 ✭✭✭blackbox




  • Registered Users, Registered Users 2 Posts: 12,949 ✭✭✭✭DrPhilG




  • Advertisement
  • Registered Users, Registered Users 2 Posts: 3,053 ✭✭✭Pique


    They're vital to prevent the entire slab from having uncontrolled cracks. I can't understand how they're eyesores.


    In any case, I think you might have no choice but to cut the slot in the slab if you want a neat solution. You can get tubs of grout like this to hide and fill the gap. https://irl.sika.com/en/construction/concrete-repair/cementitious-grouts/sikadur-42-he.html



  • Registered Users, Registered Users 2 Posts: 149 ✭✭Niall_G


    Hi all

    Does anybody have experience with the Husquavarna "extreme" cable? "Extreme Cable is break resistant cable for Auto Mowers. The cable coated with a metal mesh of tinned copper, protecting against cable breaks from rodents and garden tools and an outer coat of green plastic protecting against corrosion." Included in my quote but costs double (an extra €300 in my case). Given I will be getting the cable buried I am not convinced of the value.

    I have read most of the 119 pages and searched, and Googled, so my query is not a last one! Thanks.



  • Registered Users, Registered Users 2 Posts: 2,722 ✭✭✭kaisersose77


    Has anyone used mailboxde to purchase a robot lawnmower from Germany? Was looking at getting model below but not shipping directly to Ireland.


    https://www.mailboxde.com/


    https://www.amazon.de/dp/B0913J9BTB?linkCode=xm2&camp=2025&creative=165953&smid=A3JWKAKR8XB7XF&creativeASIN=B0913J9BTB&tag=geizhals1-21&ascsubtag=ZM631cBujkwHM3YUmqHt5w



  • Registered Users, Registered Users 2 Posts: 246 ✭✭Dutch Roll


    I've no experience of this particular cable but if you're burying it then why bother? I'd rather keep the €300



  • Registered Users, Registered Users 2 Posts: 1,636 ✭✭✭denismc


    Part of my cable was put underground by the installer, and then I did an extension where I laid the cable on the surface myself.

    In 4 years nearly all my breaks have been in the buried cable, I think the reason is because the trencher that the installer used laid the cable over some tree roots which have since grown and put stress on the cable. So having stronger cable maybe better if you have lots of trees in the garden.



  • Registered Users, Registered Users 2 Posts: 4,242 ✭✭✭brokenangel




  • Registered Users, Registered Users 2 Posts: 2,747 ✭✭✭Thud


    seems to function similarly to the segway.

    how much is it?



  • Registered Users, Registered Users 2 Posts: 212 ✭✭corcadorcha


    I am in the market for a automower. Have been reading this thread with interest. The garden is relatively straight forward and approx 600sq/m. I have been veering towards getting the basic Stihl auto mower.. What are peoples thoughts on the Stihl? Pros and cons.. Thanks



  • Registered Users, Registered Users 2 Posts: 246 ✭✭Dutch Roll


    Oh right. Thankfully I've had no such problems as I buried most of mine about 20mm deep with a spade.



  • Registered Users, Registered Users 2 Posts: 55 ✭✭captivo


    So finally looking to bite the bullet and invest in a robot mower. I've a lawn of approx 2800m2, pretty level and flat. The layout is pretty simple with the exception of a strip of lawn that joins 2 sections that is approx 5 feet wide.

    I have been looking at the Husky 430x. Does anyone know if there are any sales ongoing or upcoming? I'm not tied into Husky, open to other makes as well. Based in the South East if that makes any difference.



  • Advertisement
  • Registered Users, Registered Users 2 Posts: 7,748 ✭✭✭whippet


    I changed the blades on my Husquvarna last - didn't realise that the blades I had spare were the Endurance ones - the wife had picked them up a few months ago. The difference is really noticeable .. seems to give a much better and cleaner cut



  • Registered Users, Registered Users 2 Posts: 246 ✭✭Dutch Roll


    For anyone who has ordered one, apparently the Worx Landroid L2000 from myRobotcenter has been delayed till at least May 9th.

    Spent 2 hours on Saturday manually mowing the grass(moss) like a caveman. Cant wait to install my new machine. Just need to think of a name now...



  • Registered Users, Registered Users 2 Posts: 34,412 ✭✭✭✭listermint


    No offense. But you don't understand engineering then.

    You should have opted for tarmac surface. if you wanted one continuous drive. Concrete that's not possible.

    Expansion slots are clean. Especially when done correctly. They are also a prerequisite.



  • Registered Users, Registered Users 2 Posts: 34,412 ✭✭✭✭listermint


    Don't bother at all. You'll have he odd break. Factor that into the lifecycle of owning a mower. I would not spend that sort of money on cable ever.



  • Registered Users, Registered Users 2 Posts: 3,608 ✭✭✭Ginger83


    I have a Stihl robot. It was the most expensive one.

    I would not buy one again.



  • Registered Users, Registered Users 2 Posts: 12,949 ✭✭✭✭DrPhilG


    I didn't build the house, I bought it. So I had no control over what surface was used and starting again would cost 5 times what any mower would cost.


    Expansion slots may be clean and effective from an engineering point of view, but they are not particularly aesthetically pleasing.


    Adding another cut line half way between 2 expansion slots and filling it with bitumen would look even worse in my opinion.



  • Registered Users, Registered Users 2 Posts: 7,360 ✭✭✭witnessmenow


    They emailed me a few weeks ago offering me one for review. After exchanging a few emails, they stopped replying to me. In my last email I listed out the terms of how I would do the review, so I'm guessing they were not happy with them. I thought they were reasonable, so it makes me question the legitimateness of the whole thing.

    The two points I think they would have a problem with was

    • They would have no input to the video or the script. They could provide talking points if they wished, but I may not use them
    • I would have to make it clear I received the item for free and I would also to provide a very clear warning to my viewers about the risks of crowdfunding a project.

    They were probably right not to send me one, because there is absolutely no way I would recommend kickstarting something that costs $1500, no matter how much I liked it



  • Registered Users, Registered Users 2 Posts: 34,412 ✭✭✭✭listermint


    Fair enough. Could dig wider and drop a covered channel drain in it. They come in metal or plastic. More expensive but you'd have access to the cable you can drop into it.


    https://www.goodwins.ie/drain-channel/c-2711.html



  • Registered Users, Registered Users 2 Posts: 4,242 ✭✭✭brokenangel




  • Advertisement
  • Registered Users, Registered Users 2 Posts: 7,360 ✭✭✭witnessmenow


    I'd be happy to review it myself if they'd send me one :D



Advertisement