Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Mildew type covering on front composite door handle - how to treat?

  • 01-04-2022 02:44PM
    #1
    Movie Maestro
    Registered Users, Registered Users 2 Posts: 809 ✭✭✭


    Hi all,

    My north facing composite front door handle has what looks like some kind of blue/green mildew all over it. Has anyone seen this before please and know what is the best treatment for it thanks?

    Any advice welcome :)

    PXL_20220401_143133048.jpg PXL_20220401_144720072.jpg PXL_20220401_143123963.jpg


Comments

  • #2
    10-10-20
    Registered Users, Registered Users 2, Paid Member Posts: 9,734 ✭✭✭10-10-20


    That looks like the brass-effect coating is wearing off allowing the metal under it to oxidise.

    Replacement might be the only fix for the bright-work.

    Are you near the sea? If so ask about more durable finishes. Sorry!



  • #3
    Movie Maestro
    Registered Users, Registered Users 2 Posts: 809 ✭✭✭Movie Maestro


    Thanks for the quick reply and advice, no not near the sea at all. I was hoping it would be fixable ☹️ The front letter box is not great either as you can see ☹️ This started happening a couple of years after the new door was installed, I would have expected it to have a more durable finish.

    PXL_20220401_143144652.jpg




  • #4
    Alun
    Registered Users, Registered Users 2, Paid Member Posts: 21,534 ✭✭✭✭Alun


    Not mildew, as said above, it's the copper in the brass plating that's corroding and causing that blue-green colouration. You might be able to temporarily improve the look slightly with some good quality metal polish, but long-term I'd start looking at a replacement.



  • #5
    Movie Maestro
    Registered Users, Registered Users 2 Posts: 809 ✭✭✭Movie Maestro


    Cheers Alun, that makes sense alright, thanks for the feedback, looks like a replacement is probably the best way to go.



  • #6
    Alun
    Registered Users, Registered Users 2, Paid Member Posts: 21,534 ✭✭✭✭Alun


    The problem is that there's a lacquer coating to stop the brass tarnishing and needing constant polishing, plus it's not solid brass anyway so polishing it would rapidly result in the plating wearing away. The lacquer pits, moisture gets in and you get corrosion. It's particularly prevalent in coastal areas but other airborne pollution can probably cause pitting as well, such as soot from wood / coal fires.



  • Advertisement
  • #7
    10-10-20
    Registered Users, Registered Users 2, Paid Member Posts: 9,734 ✭✭✭10-10-20


    I'd guess that the letterbox is extruded aluminium with the copper/brass plating on top. It suffers from that type of surface bloom/oxidation which creeps under the layers. As Alun says, if you touch it, it will all fall away.



  • #8
    jack of all
    Registered Users, Registered Users 2 Posts: 2,376 ✭✭✭jack of all


    +1 on above, you can get a powder coated fittings that may prove more resistant to oxidation, or look at PVD brass, but may not be available to suit your door.



  • #9
    Movie Maestro
    Registered Users, Registered Users 2 Posts: 809 ✭✭✭Movie Maestro


    Cheers for all of the feedback, it's VERY much appreciated!



Advertisement