Daily pv production

Looks like a good day on paper/screen but wouldn't count on it, major cloud cover...

Yeah, it's been good, looking like I'll be 170kWh+ ahead of forecast for the month.

Jan and Feb were below forecast, so swings and roundabouts etc.

Best day yet since I installed my system end of October last year 41.3 kWh.. (6.1kWp Cork)

The afternoon got cloudy unfortunately but topped off the month nicely with 761 kWh total👌

30kwh in the end today and a pretty wild curve where it spiked to 7kwh a few times 😁

Cracking month, a very unexpected 709kwh in the end

Eco

Well done , are they ground mounted or on house ? 👍👍

This is my first days production. It peaked at 6.85kW, which I guess isn’t bad for a 7.2kW install. My battery was fully charged by 11 and the hot water tank took 7.2 kWh

We will need to get used to maxing usage in the middle of the day. The missus put the dryer on at 4pm and emptied the battery even though we exported 4kWh in the early afternoon.

Turned out to be good day after not great day promised. Tomorrow looks reasonable and then looks like really poor week ahead

Tomorrow is estimated to be worse than today so you're probably safe to do it

Whole week looks like 🐶💩 in Dublin actually.

Great to see things working above spec, 5.76kWp of panels on South 5kWp inverter but hitting 7kW thanks to DC-coupled battery and I guess great panels.

A surprising improvement today saying as weather has been promised worse than yesterday. 12.3kwh for a wild wet day here.

Tomorrow is more of the same but going to keep fingers crossed and turn charging off again tonight

Same, hit 103.5% production on my 6.84kwh setup at one stage.

28.3kw was impressive as the weather was scutter most of the day. Still trickling in, the longer days having an impact.

EDIT: @irishchris how is it that your myenergi shows 8.2Kw incoming when you have a 6Kw inverter? Just when I think I understand my brain melts!

I had a decent day but I think there is something up with my setup. I never hit over 6kwp on myenergi even though my setup is 6.8kwp. Does below look like clipping (my inverter can take 9kw in though?). Could inverter be causing this?

ah, was thinking it might be the nominal power setting on the DC side, set to just 6000w, I thought changing that might allow more

Also, more than one inverter - now I'm even more confused. What controls the max output to the grid, and keeps it <= 6kw, do the 2 inverters communicate in some way?