Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

FS Shimano Claris part groupset.

  • 01-03-2022 10:14AM
    #1
    Registered Users, Registered Users 2 Posts: 860 ✭✭✭


    Selling a Claris 8speed part groupset. Consisting of shifters, mechs and cassette. Looking for 60 euro. For another 20 will include a set of wheels complete with tyres. Band on front mech.



Comments

  • Registered Users, Registered Users 2 Posts: 1,083 ✭✭✭nicksnikita


    Hi,

    Are these the newer R2000 or the older 2400 series.

    Offer asking if newer series.

    Cheers



  • Registered Users, Registered Users 2 Posts: 860 ✭✭✭micase


    R2000 on front and rear mechs so I assume same for shifters. Do you want the wheels as well, they are Axis something from a Specialized Allez.



  • Registered Users, Registered Users 2 Posts: 860 ✭✭✭micase


    PM sent.



  • Registered Users, Registered Users 2 Posts: 90 ✭✭xDerp


    Are these sold?



  • Registered Users, Registered Users 2 Posts: 860 ✭✭✭micase


    Yes long gone



  • Advertisement
  • Registered Users, Registered Users 2 Posts: 2,247 ✭✭✭Paul Kiernan


    I've a set of R2000 I just took off a bike. BSA Bottom bracket, FSA Tempo 46/30 cranks, Shifters, Mechs, Cassette and gravel bars with long cables - €140. Reason I'm including the bars is they were recently taped up and could be whacked straight on to a bike without much hassle. Probably worth changing the inner cables but outer can be left in place. I'm in Dublin 18, close to N11/M50.



  • Registered Users, Registered Users 2 Posts: 917 ✭✭✭oinkely


    any idea if these cranks would work with 9 speed? I've a 39/53 dura ace 9 speed bike but have a hilly as hell adventure race in killarney in October. Was thinking of swapping out the cranks to have smaller rings?



  • Registered Users, Registered Users 2 Posts: 2,373 ✭✭✭Seadin


    I say you will also have to also change out the BB to accommodate the FSA cranks.



  • Registered Users, Registered Users 2 Posts: 2,247 ✭✭✭Paul Kiernan


    Sorry. Been away on holidays and only saw this. Tried it with a 10 speed chain and it seemed fine so probably OK with 9-speed. They're square taper but you're welcome to borrow the cranks and bottom bracket for the event if it works for you (your frame would need to take BSA BB).



  • Registered Users, Registered Users 2 Posts: 917 ✭✭✭oinkely


    Thanks. How much for the cranks and BB? Cheers



  • Advertisement
  • Registered Users, Registered Users 2 Posts: 2,247 ✭✭✭Paul Kiernan


    I'd want €50 for them which is a probably a bit dear TBH but I know I'll need them for as build at some stage and be sorry I sold them!

    You're welcome to borrow them for nothing though!



  • Registered Users, Registered Users 2 Posts: 917 ✭✭✭oinkely


    Thanks. I'll pm you and arrange a lend.



Advertisement