If we do not hit our goal we will be forced to close the site.
Current status: https://keepboardsalive.com/
Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
Private Group for paid up members of Boards.ie. Join the club.
HKC Sensor Issue
-
22-10-2021 10:54AM#1
Hi
I wanted to seal the draft coming in the window and do some painting , I removed the HKC cover and unbolted from the window frame
I done this in the sitting room with no issue
On removal , When I remove the cover , tamper proof is triggered and an alarm event occurs, fault light is illuminated on the control panel
On re-install to the window frame, cover installed , fault light is gone on the control panel, Power Green led only but the led screen still illustrates open zone
Again When I remove the cover , tamper proof is triggered and an alarm event occurs, fault light is illuminated on the control panel
In the loop I go ,
Questions
Would the Tec7 of caused an issue (some is behind sensor) , I need to remove to ensure the sensor is completely flat against the window frame; I presumed these are shock sensors not impacted by measuring the tilt?
Do I need to reset the alarm ?
0
