Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Converting halogen to led

  • 28-08-2021 03:47PM
    #1
    Registered Users, Registered Users 2 Posts: 237 ✭✭


    Hi, I have 10 halogen downlights that I'd like to convert to gu10. I changed the dimmer switch to be Led compatible, & connected gu10 lamp holder to wires in ceiling, but no luck. Do I need to get Led drivers for each bulb? If I was to get an electrician in to do it, any idea of the cost? Thanks in advance



Comments

  • Registered Users, Registered Users 2 Posts: 639 ✭✭✭shane b


    Do you have gu10s already or do you have low voltage versions eg mr16?

    The low voltage down lighters have a transformer at each light that that usually has to removed to work with 240 volts bulbs.



  • Registered Users, Registered Users 2 Posts: 237 ✭✭lukegriffen


    Thanks for replying, I currently have mr16 halogen & wish to replace these with gu10. I looked and couldn't see any transformer at each light. (See photo of old halogen, so in another light I've hooked up the gu10 lamp holder, but it's not working)




  • Registered Users, Registered Users 2 Posts: 639 ✭✭✭shane b


    As I mentioned the gu10 is not going to work as it 240 volt and the mr16 low voltage is 12 volt. There has to be a transformer there, yo need to pull more cable down.

    Check this link it has a photo attached




Advertisement