Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

GSM-WIFI and SW-1070

  • 20-10-2019 08:54PM
    #1
    mickthewig
    Registered Users, Registered Users 2 Posts: 20 ✭


    Has anyone ever managed to get a GSM-WIFI to work with an SW-1070?

    I'm starting to suspect that this card might be only for the SW-10270 or Quantum and I need to swap it out for a GSM-SC.


Comments

  • #2
    kub
    Registered Users, Registered Users 2 Posts: 6,581 ✭✭✭kub


    Yes, lots of times.


    What software have you on your 10/70?

    You probably need the latest version of software


  • #3
    mickthewig
    Registered Users, Registered Users 2 Posts: 20 ✭mickthewig


    The software on the panel is SW1070 V3.1.1.

    On the product information PDF on the HKC site, it says that version 4.0 of the software is needed for the 10270, but there's no mention of the 1070 in the sheet at all.

    https://ecat.assaabloy.co.uk/gallery/HKC/Communicators/GSM_-_SecureComm_wWorld_Sim__WiFi/GSM-SC.pdf?dl=1

    >Plugs directly onto SW-10270 panel
    >(version 4.0 or higher panel software required)

    I rang HKC and they won't give access to Smartlink 700 for a self-install or self-upgrade.


  • #4
    kub
    Registered Users, Registered Users 2 Posts: 6,581 ✭✭✭kub


    mickthewig wrote: »
    The software on the panel is SW1070 V3.1.1.

    On the product information PDF on the HKC site, it says that version 4.0 of the software is needed for the 10270, but there's no mention of the 1070 in the sheet at all.

    https://ecat.assaabloy.co.uk/gallery/HKC/Communicators/GSM_-_SecureComm_wWorld_Sim__WiFi/GSM-SC.pdf?dl=1

    >Plugs directly onto SW-10270 panel
    >(version 4.0 or higher panel software required)

    I rang HKC and they won't give access to Smartlink 700 for a self-install or self-upgrade.

    The 10/70 became known as the 10/270, the reason was because with software upgrades the panel is capable of taking a whole lot of zones.

    HKC are a manufacturer for the trade, in order to get your software upgraded I would suggest you contact a licensed installation company.


Advertisement