Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Help! Ferguson ariva 254 no sat signal.

  • 10-01-2019 09:53PM
    #1
    bejaysus
    Registered Users, Registered Users 2 Posts: 40 ✭


    I'm hoping someone can help me before the wife kills me.

    I had a Fergusan Ariva 150 which suddenly lost sat signal, signal down to 10%.

    The cap on the LNB was all cracked so I thought that might be the issue so replaced the LNB with a new one but still no signal.

    Tried another box and it worked perfectly so then I thought the receiver was fecked.

    I bought a Ferguson Ariva 254 thinking I'd plug in
    the sat wires and all would be OK again but it's the same as the 150,10%signal!

    Saorview signal is perfect.


Comments

  • #2
    Thargor
    Registered Users, Registered Users 2 Posts: 18,303 ✭✭✭✭Thargor


    Did you use a satfinder to see if it was still aligned before you replaced the LNB?


  • #3
    bejaysus
    Registered Users, Registered Users 2 Posts: 40 ✭bejaysus


    Thargor wrote: »
    Did you use a satfinder to see if it was still aligned before you replaced the LNB?

    I used a signal finder to check the signal and there was none with ariva 150. Replaced LNB.

    Another box is working perfect on the same connection with the new LNB.

    The other box is a saorview connect box
    that was a borrowed box that's now gone back.

    The new box, ariva 254, is showing no signal with the signal finder also like the 150.


  • #4
    Tony
    Registered Users, Registered Users 2 Posts: 11,368 ✭✭✭✭Tony


    Sorry if its an obvious question but are just connected to the "LNB In" ? Its in a different position on the box on the 154.

    Owner: satellite.ie



  • #5
    Thargor
    Registered Users, Registered Users 2 Posts: 18,303 ✭✭✭✭Thargor


    That's a strange one. Is lnb power turned on in the Ariva settings?


  • #6
    Johnboy1951
    Registered Users, Registered Users 2 Posts: 13,950 ✭✭✭✭Johnboy1951


    bejaysus wrote: »
    I'm hoping someone can help me before the wife kills me.

    I had a Fergusan Ariva 150 which suddenly lost sat signal, signal down to 10%.

    The cap on the LNB was all cracked so I thought that might be the issue so replaced the LNB with a new one but still no signal.

    Tried another box and it worked perfectly so then I thought the receiver was fecked.

    I bought a Ferguson Ariva 254 thinking I'd plug in
    the sat wires and all would be OK again but it's the same as the 150,10%signal!

    Saorview signal is perfect.


    I would first look at the cable end/s at the STB and wall socket.

    What you describe could be due to an intermittently faulty cable termination.

    I would double check cable terminations within the home .... including wall socket etc.


  • Advertisement
  • #7
    bejaysus
    Registered Users, Registered Users 2 Posts: 40 ✭bejaysus


    Thargor wrote: »
    That's a strange one. Is lnb power turned on in the Ariva settings?

    Yes. And I turned it off and turned it back on.


  • #8
    bejaysus
    Registered Users, Registered Users 2 Posts: 40 ✭bejaysus


    Tony wrote: »
    Sorry if its an obvious question but are just connected to the "LNB In" ? Its in a different position on the box on the 154.

    Yeah it's connected to the LNB in.

    There's actually 2 cables coming from the satellite into that room from a 4 lnb and both don't work.


  • #9
    Tony
    Registered Users, Registered Users 2 Posts: 11,368 ✭✭✭✭Tony


    Did you get UK channels when you used the connect box or just saorview ? (sorry again for the obvious question)

    Owner: satellite.ie



  • #10
    bejaysus
    Registered Users, Registered Users 2 Posts: 40 ✭bejaysus


    Tony wrote: »
    Did you get UK channels when you used the connect box or just saorview ? (sorry again for the obvious question)

    No bother

    I got both sat and saorview all working perfectly


  • #11
    STB.
    Registered Users, Registered Users 2 Posts: 5,380 ✭✭✭STB.


    For your Ferguson 150, download the firmware for that box here. Unzip the abs to a usb stick, put in ferguson and update the firmware via the menu. Choose allcode and bootloader in option and let it flash. Then go in and select 28.2e as satellite and scan it.


  • Advertisement
  • #12
    bejaysus
    Registered Users, Registered Users 2 Posts: 40 ✭bejaysus


    STB. wrote: »
    For your Ferguson 150, download the firmware for that box here. Unzip the abs to a usb stick, put in ferguson and update the firmware via the menu. Choose allcode and bootloader in option and let it flash. Then go in and select 28.2e as satellite and scan it.

    Thanks I'll give it a go.


  • #13
    Deliverance XXV
    Registered Users, Registered Users 2 Posts: 1,757 ✭✭✭Deliverance XXV


    bejaysus wrote: »
    Thanks I'll give it a go.

    Did you ever get this working? I am having the same issue on Ariva 254 - thread here.


Advertisement