ABS cable frayed.

JJJJNR · 2018-07-23 21:02:09

Changed the shock on my drivers side yesterday, all was well until today when I got an abs error flashing up on the dash. Took the wheel off and the cable has been slightly frayed any ideas how to fix this would it need an electrical engineer. I have a donar car which I can take the cable from but is it something that will…

23-07-2018 09:02PM

#1

JJJJNR

Closed Accounts Posts: 4,786 ✭✭✭

Join Date: September 2005

Posts: 4375

Changed the shock on my drivers side yesterday, all was well until today when I got an abs error flashing up on the dash.

Took the wheel off and the cable has been slightly frayed any ideas how to fix this would it need an electrical engineer. I have a donar car which I can take the cable from but is it something that will unclip from both ends.

0

Comments

#2 23-07-2018 09:05PM

Alanstrainor

Registered Users, Registered Users 2 Posts: 23,146 ✭✭✭✭

Join Date: September 2006

Posts: 22283

That should unclip from both ends. Sensor one end and connector at the other. Unless this is the harness for the sensor... but I doubt it.

If the part isn't too expensive then it'd be best to replace the sensor. I've bought them cheap for my BMW.

0