E-Channelizer for Enigma2 .

Oat23 wrote: »

Yeah that's probably it! Update to 4.0 if you can.

thanks I'll give a shot tomorrow so. I may have more questions though:D

Could one yous tell me how to get this image on the box please?? It's driving me crazy

Snake Plisken wrote: »

Are you talking about the latest open PLI image? Quick question is your dreambox 800SE an original or clone?

it's a clone. When I hold the power button and restart it doesn't return an IOP address - it just says DCHP

Snake Plisken wrote: »

So restart your. dreambox normally go into settings network and check current setting and see what the IP address is currently that will be the up address to type into browser next time you restart and hold the power button and dhcp stop type the IP into your browser and it should bring up the flash screen just make sure you have downloaded a clone modified image or you could brick your box

thanks Snake. Although it just tries to load webcontrol on my browser, then produces an error when I put the IP in.

I probably should add I'm doing this over wifi. I'll try with a wall plug tomorrow in case this is the issue

Snake Plisken wrote: »

Possibly I usually do mine via Ethernet cable also it sounds like the box isn't going into boot loader mode it should say stop dhcp and the Ethernet address of the box the stop message should stay on the oled display when you type the address into the web browser it should bring up the firmware update webinterface sure keep at it and let us know how you get on
Just to clarify
1) box fully powered off via power switch at back
2) hold power button in on front don't let go
3) turn the box back on with power switch at back
4) keep finger on power button until you see the word STOP on the oled panel and it should show the IP address as well
5 open browser window and type that IP address and image update page should load

thanks Snake. Getting there

one last problem (I Hope) - the images I tried so far shows incorrect architecture

any chance you DM me the one you got working?

Snake Plisken wrote: »

I used to get my clone images here http://www.sat-universe.com/forumdisplay.php?f=486

Have a look there for suitable image they are usually official images that have been patched to work on the clone boxes

thanks will check now. I found a black hole image earlier and used that. Disaster!! Now my e2 doesn't work

yellowking wrote: »

I have UK working perfectly with Echannelizer but whenever I try to go to all Sats it defaults to just 28.2e I have downloaded the full satellite.xml list from Lyngsat but I can't see where to add other sats to my default listing.
Can anyone please advise ?

What box have you? And where's your dish pointing?

hi does anyone know how to drag and drop a group of channels, i have been setting up my iptv , but i have only been able to drag and drop one channel at a time,which takes forever. i know it can be done because ive seen people doing it on youtube, but for some reason they dont explain how they are doing it. very frustrating.

yellowking wrote: »

Dish is pointing to 28.2 but I have IPTV from around the world I want to get EPG for. Evo Mini running openatv iPab

It would be great to get a straight forward guide on how to do this!

patrick the king 1 wrote: »

Anyone know a quicker way of asigning the epg other than pressing the + on the 28.2 satellite and searching through the corresponding stations.

On an older version it was possible to drag and drop from the main satellite list. That doesn't seem to be working anymore.

Anyone have any ideas how to use ABM in conjunction with E-channelizer?

I imported my ABM bouquets into E-Channelizer, then edited in E-Channelizer and uploaded back to box. I deleted some ABM bouquets no longer needed after the edit.

When ABM runs it edits the bouquets, removing channels that began life in deleted ABM bouquets, and removing any bouquet that originated in E-Channelizer.

I have tried selecting 'Yes' to Keep All non ABM bouquets, and experiemented with 'Place Bouquets at' Top and Bottom (a UK forum suggested using 'Bottom' along with Yes to keep ABM solved the problem).

At this stage I've turned off ABM updates, would prefer though if I could leave this on.

I never remember having an issue with editing bouquest in dreamboxedit, but I can't remember if I had certain settings that prevented issues.

I have an Xtrend ET8500 running latest verison of OpenVix by the way.

Thanks!

Sayyid

Have you thought about compiling this to work on the android platform rather than windows ?

@Stux. So... I dont use EChannelizer, I use another free programme called dreamset (http://www.dreamset-editor.com/index.php)

What you do is pick the sats you want, it will download the data from Kingofsat for the various sats you have chosen.

You then just set up a favs list whilst in the editor and drop the stations you want into it.

Then flash accross lan to box. Then I manually scan the dvb-t channels and either add those via the remote or flash that list back to pc and add to fav list. Then save on pc and then flash back to box.

If you are using two feeds from Sat, I presume you are using a diseqc switch and you will have to tell the box that Port a is 28.2e and port b is 13e.

Most of these sat order programme would not have the terrestrial channels TP (or muxes as they are called on Dvb-t) built in.

Hi all. STILL trying to perfect Formuler F1 sat box with OpenATV. Can someone tell me (in simplest way for NEWBIES) how I can:


(1) Re-order channels (for some reason RTE1 channel number has been changed and is now nowhere near the other Irish/Saorview channels.


(2) I have a HDD attached but only some recordings have been saved. On several occasions, the box seemed to be recording as set but nothing visible in the playlist afterwards. Only 2 recordings have been saved out of 10/12 attempts.


Any help would be greatly appreciated.