Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Angelcare Nursery Unit not working

  • 30-09-2017 01:28PM
    #1
    Celtic Runner
    Registered Users, Registered Users 2 Posts: 11 ✭


    Hi, the nursery unit of our Angelcare monitor (AC 401 model) is not making noise when there has been no movement on the sensor pad. We have another set and the alarm sounds when i use a different nursery unit so I know that there is no issue with the sensor pad. Any ideas why the nursery unit alarm won't sound ? TIA


Comments

  • #2
    jlm29
    Registered Users, Registered Users 2 Posts: 3,818 ✭✭✭jlm29


    Celtic Runner wrote: »
    Hi, the nursery unit of our Angelcare monitor (AC 401 model) is not making noise when there has been no movement on the sensor pad. We have another set and the alarm sounds when i use a different nursery unit so I know that there is no issue with the sensor pad. Any ideas why the nursery unit alarm won't sound ? TIA

    I can't answer your question, but I have found them very responsive when I've emailed the address on the website with a query about my own monitor which isn't working either


  • #3
    Celtic Runner
    Registered Users, Registered Users 2 Posts: 11 ✭Celtic Runner


    Thank you jlm29. I'll pop them a mail now.


  • #4
    jlm29
    Registered Users, Registered Users 2 Posts: 3,818 ✭✭✭jlm29


    Celtic Runner wrote: »
    Thank you jlm29. I'll pop them a mail now.

    Hopefully it will be easy fix, but you can just buy a replacement nursery unit if not!
    Mine is broken too, but I'm not sure which end is broken!


  • #5
    PhoenixParker
    Registered Users, Registered Users 2 Posts: 2,698 ✭✭✭PhoenixParker


    What's the sensor pad sensitivity setting on each nursery unit?

    The sensors are really sensitive to any movement in the room and the sensitivity is set on the nursery unit. If it's set to high sensitivity on your one it will not sound because it picks up normal small vibrations in the house. If the other is set to low sensitivity it will sound in the same conditions. Counter intuitively you need to set it to have low sensitivity.


Advertisement
Advertisement