How much to wire up shed for electricity?

Arciphel · 04-10-2016 07:42PM #1

Hello sparks,

Just looking for an idea of price for wiring up a shed properly.

Want to install new RCD and bring power approx 15 metres down side of the house and down the garden to the shed, which is concrete. Also wire up four sockets in shed and a fluorescent light with switch. I am assuming the wire will have to be buried underground or can it be housed in trunking and attached to wall above ground?

Glen_Quagmire · 05-10-2016 07:43PM

You could use SWA cable which is armoured and can be clipped on a wall. You'll need to install a small one row consumer unit in the shed with a rcd and mcbs for the sockets and lights. You'll need a switch fuse or mcb in the main consumer unit protecting the SWA cable to the shed with the correct discrimination between upstream and downstream mcbs.

I reckon about 250 to 300 would cover it for materials and labour

Arciphel · 05-10-2016 08:46PM

Got quoted just over €720!:eek:

Glen are you an electrician by any chance? If so - want to be friends?:)

05-10-2016 10:21PM

Arciphel wrote: »

Got quoted just over €720!:eek:

That is not necessarily a bad price for a professional job.

Risteard81 · 05-10-2016 10:59PM

Arciphel wrote: »

Got quoted just over 720!:eek:

Perfectly reasonable in my opinion. I don't believe 250-300 is remotely realistic.

eeguy · 05-10-2016 11:03PM

200e easy for materials alone.

3 switches, 4 sockets, 15 metres of cable, a light fitting and tube plus extras.
Probably a half a days work getting everything installed and squared away.

Risteard81 · 05-10-2016 11:11PM

eeguy wrote: »

200e easy for materials alone.

Probably a half a days work getting everything installed and squared away.

If the cable is to be buried then it could take quite a while longer than that, and also if it is awkward to access the supply inside.

Bendihorse · 05-10-2016 11:17PM

I got quoted 1500 for a very similar job without the trip down the garden, didn't go ahead with it.

eeguy · 05-10-2016 11:34PM

Could you buy the material and wire up the shed yourself?

Possibly only get a sparks in to hook up to the main CU and throw an eye over your work?

Steve · 05-10-2016 11:47PM

eeguy wrote: »

Could you buy the material and wire up the shed yourself?

Possibly only get a sparks in to hook up to the main CU and throw an eye over your work?

If you are a pro but not REC and you personally know them - maybe - otherwise no.

Risteard81 · 06-10-2016 01:40AM

eeguy wrote: »

Could you buy the material and wire up the shed yourself?

Not legally. You need a Registered Electrical Contractor (REC).

stevek93 · 06-10-2016 01:44AM

Risteard81 wrote: »

Not legally. You need a Registered Electrical Contractor (REC).

Never knew this, so if I want to run a electric wire to my shed for a light or socket it's illegal?

06-10-2016 05:14AM

stevek93 wrote: »

Never knew this, so if I want to run a electric wire to my shed for a light or socket it's illegal?

It is now illegal for anyone other than a REC to do most domestic electrical work. Have a look at the links in the forum charter.

marklazarcovic · 06-10-2016 05:22AM

Paid 800 in Galway for it,few more sockets though

dbagman · 06-10-2016 05:35AM

Glen_Quagmire wrote:

I reckon about 250 to 300 would cover it for materials and labour

Materials alone will run near this. I'm a sparks but for that price will you wire my shed too?

Glen_Quagmire · 06-10-2016 01:26PM

Materials are approx 150 and I am estimating about 4 hours to do the work so 250 to 300 is probably a little short.

Of course you would have to see how difficult it is for the cable run from the board to the shed and how difficult the install is in general but 800 quid (650 quid for labour) seems very high to me.

06-10-2016 02:47PM

Glen_Quagmire wrote: »

Materials are approx 150

Even with low quality materials this would be a great price.

800 quid (650 quid for labour) seems very high to me.

This is where you are getting confused.
The remaining €650 is not just for labour.
This has to cover:
1) VAT
2) All overheads (including van, tools, insurance, certs, registration, accountant etc...)
3) Wages (inc. holiday pay & pension).

That takes care of a fair chunk of the €650!

Remember a good electrician can earn a reasonable wage working for an electrical contractor. Therefore electrical contractor generally aim to make a bit more due to the additional effort required and the finincial risks they are exposed to.

There is a general misconception that everything after the cost of materials has been accounted for is simply profit. The reality is quite different.

fred funk }{ · 06-10-2016 09:08PM

Great post 2011.

asteroids over berlin · 06-10-2016 09:12PM

Hunt down many of the unemployed sparkies and get it done for circa 500!

06-10-2016 09:14PM

asteroids over berlin wrote: »

Hunt down many of the unemployed sparkies and get it done for circa 500!

What planet are you living on?
A quality unemployed sparks is as rare as rocking horse sh!t.

The Premier Man · 06-10-2016 09:14PM

Any sparks that is still unemployed either has no interest in working or is pretty poor as any half decent one has been snapped up in the last 2 years

Stoner · 06-10-2016 11:32PM

All true, I'd say OP that you have your answer, the charter is strict on costs having to include Vat etc so that's roughly where the costs are I agree with your initial quote too, I don't think there's any need to discuss costs further since it will inevitably end up in under the counter costs discussion.