RF2-Out on skybox

tippgaafan · 25-08-2005 4:05am #1

Hello there,
I have a query in relation to installing a tv link on a 2nd TV to enable changing of sky channels from the bedroom. My current set up is a co-ax from RF2-out, up into the attic and splitting (Y-splitter) to bedroom and kids playroom. I want to install the tv link at the bedroom. I was wondering what actions if any I will need to do, when turning on the 15volts on RF2 out, to prevent any damage to TV in playroom (No tv-link).

Thanks in Advance.....

Tony · 25-08-2005 8:38am

tippgaafan wrote:

Hello there,
I have a query in relation to installing a tv link on a 2nd TV to enable changing of sky channels from the bedroom. My current set up is a co-ax from RF2-out, up into the attic and splitting (Y-splitter) to bedroom and kids playroom. I want to install the tv link at the bedroom. I was wondering what actions if any I will need to do, when turning on the 15volts on RF2 out, to prevent any damage to TV in playroom (No tv-link).

Thanks in Advance.....

well firstly you would need to remove the Y splitter and replace with a sky compatible amp such as the F150 or similar, you will also most likely get an improved picture as Y splitters tend to be very lossy.

Hope this helps

RF2-Out on skybox

Comments