Ftp'ing xbox to PC

Delta_ie

Has any here ftp'ed their xbox to their pc when they are starting the install of slayers to back up the C, bios etc.
Could they please tell me how they did it as I am finding it difficult.....

po0k

You need an FTPd running on your PC to FTP into the PC to backup your data.

FileZilla Server

Chong

Use Flash Fxp works perfectly for me every time.

Delta_ie

I am using flashfxp and have tried using IE also, but the connection keeps timing out.
I wanted to know what settings people were for the ip's, default gateways,etc
If any one knows slayers when you put in the disc for the first with out installing anything there is a network settings/info link, that will pop up a window with network info. What i want to know is what info do I use to ftp the xbox to the pc.....

zAbbo

It might be easier to ftp from the pc to the xbox.

Whats the ip of the xbox?

Delta_ie

Sorry that is what i was trying to say, on slayers it says the ip is 192.168.1.200

zAbbo

how are you connected to the xbox, via a xover cable or through a router/hub/switch

Just use an ip that is on the same network as ur xbox one, eg 192.168.1.199

see can you ping it

Delta_ie

I am using a crossover cable

Delta_ie

I tried pinging 192.168.1.199 and 192.168.1.200 but on all atemps it timed out.

I have all settings at default on my pc and the two ethernet ports are connected with a crossover cable, also this is all the info given in slayers.

Type
IP - 0.0.0.0.
Line status - 100/Full Duplex
Ethernet MAC address - 00:0D:3A:49:95:53

The above 4 lines are in blue so I say this relates to the pc
The rest of the line below are in white,

Setup Network - Yes
Use Static IP - No
IP - 192.168.1.200
Subnetmask - 255.255.255.0
DefaultGateway - 192.168.1.1
DNS - 192.63.248.1
DNS - 217.13.7.140
Setup Delay - 0

zAbbo

With the ip 0.0.0.0 means that theres no network detected, either your cable is borked or something else?

Can you change Static IP to yes?

GrumPy

ftp is by far, the easiest thing about having a modded xbox, just make sure xbox is set to static, (u cant do it permently obviously if you are runnig off slayer's disc) make sure xbox's ip is higher then pc's, and the subnet is 255.255.255.00 or sometihng (you'll know what i mean when you see it on the NIC's properties.

Delta_ie

Doesn't matter got it to work in the end. Just extracted the iso and then changed the evox.ini , then created another iso with the settings from the mrRobbinson guide...