NAT for wireless router

Gangsta

How do I configure the NAT for my wireless router (ie. apple airport) so I can use azureus. I've tried using the ip of the modem and the router but i still get nat error in the NAT test.

Fobia

Is the problem NAT or port forwarding?

I don't know anything about apple Airports, but if NAT is already working then you need to go into the port forwarding options on the router (this can come under a variety of names), and enter the ip (ie 192.168.1.* if you're using that range) of your computer, and the port you want the program to use.

Hope that helps..

Gangsta

yes yes port forwarding. I've tried using the ip of the modem and the router but to no avail. I can't use both at the same time because it says duplicate port error.

jor el

www.portforward.com might help if it lists your router. If not, look for a similar one and it may just work. Did for me anyway.

Fobia

Gangsta wrote:

yes yes port forwarding. I've tried using the ip of the modem and the router but to no avail. I can't use both at the same time because it says duplicate port error.

You enter the ip of the computer running the program into the wireless router, not the ip of the modem or the router...the idea is to let the computer use the ip of the wireless router when using that port rather than a local address, and therefore allowing other people to connect to you via the internet.

Gangsta

what i meant was I used the ip the modem and router gave me for the bb connection and wireless network respectivly. No worrries, got it working now.