Gear change on savage 25

Dan_B · 28-04-2005 12:29pm #1

Hi,
When I switch from reverse to forward sometimes the gear dosen't quite engage and the truck just revs and sits there.
If I pick up the truck and push the gear forward a tiny bit it works fine.
The problem seems obvious enough but what do I need to do to fix.

Cheers

SLIM19198 · 28-04-2005 1:00pm

adjust the give on the servo feeding the gear change (usually a small round adapter that takes an allen key to adjust!)

Dan_B · 29-04-2005 7:28am

thanks, I'll give it a shot tonight.

Dan_B · 09-05-2005 7:20am

That worked, thanks a mill!!

snakeater · 18-05-2005 12:08pm

I had exactly the same problem, although in mine the gear cog is slightly damaged. Which is a pain as I'll prebably have to get a new one.

Plug · 14-06-2005 11:13pm

the idle could of being to high, i get that an odd on my maxx.

snakeater · 15-06-2005 10:32am

Yeah, when I ordered my spares I got a good few of them to be on the safe side. Just in case it ever happens again.Found an english site that delivered the parts in 3 days with free delivery.

Plug · 15-06-2005 2:17pm

Which company are they, my lower suspention arm is f**ked and need a new one. The model shop in waterford dont have it and the same with tower hobbies :mad: . I heard apex or model sport uk are good

SLIM19198 · 16-06-2005 7:16am

I use modelsport about every 2 weeks now, fine to deal with!

snakeater · 17-06-2005 12:54pm

Plug wrote:

Which company are they, my lower suspention arm is f**ked and need a new one. The model shop in waterford dont have it and the same with tower hobbies :mad: . I heard apex or model sport uk are good

I used http://www.glowstart.co.uk is the suspension arm for a savage 25?

Gear change on savage 25

Comments