Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Pc Build -Power supply

  • 05-12-2004 12:43pm
    #1
    karltimber
    Moderators, Home & Garden Moderators Posts: 1,928 Mod ✭✭✭✭


    Howdy folks,
    Just received my Cheiftec dragon case from komplett and found that the power supply connector for the mainboard is an ATX 2*12 white connector.
    But the connector on the board is 10*2 and so does not fit.

    Is 10*2 the standard for mainboards and the case ps is in-correct.


    thanks in advance

    karlos


Comments

  • #2
    Ave
    Closed Accounts Posts: 189 ✭✭Ave


    It should fit on it, with the extra 4 connectors hanging off the edge.

    Do a google to see which side should hang off it.

    (alternatively, you may be able to buy a 10 > 12 adapter)


  • #3
    karltimber
    Moderators, Home & Garden Moderators Posts: 1,928 Mod ✭✭✭✭karltimber


    is this a common thing that happens with mainbd and ps connectors.
    Are the 4 connectors not needed ??

    karlos


  • #4
    Ave
    Closed Accounts Posts: 189 ✭✭Ave


    Fairly common.

    My akasa 460W PSU came with the 10x2 and a 10x2 > 12x2 adapter.


  • #5
    karltimber
    Moderators, Home & Garden Moderators Posts: 1,928 Mod ✭✭✭✭karltimber


    just checked - no room either side for the extra part of the connector.

    Did you just say that your pc has a 24-20 Atx ps connector.

    Where will I get one ? maplin don't have one -- blanch..

    karlos


  • #6
    karltimber
    Moderators, Home & Garden Moderators Posts: 1,928 Mod ✭✭✭✭karltimber


    just onto Peats and found out that 2*12 atx connectors are now standard for power supplies and that I need a 2*12 to 2*10 adaptor (which peats & maplin ddon't have).

    any ideas where I could get one of these adaptors.

    ps cable is 2*12 -male
    connector for motherbaord is 2*10- female


  • Advertisement
Advertisement