Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Installing external tap at front of off-street terraced property in Dublin. Planning permission/cost

  • 10-08-2025 02:37PM
    #1
    Registered Users, Registered Users 2 Posts: 518 ✭✭✭


    My house is a mid-terrace in Dublin. The front wall of the house is 5m away from the public footpath and has a driveway with a garden.

    I want to install a tap to the front of the property, does this require planning permission or not as it's off street?

    The water supply comes from the front of the house, so I assume it's fairly easy to do this, or is it a big job? What sort of cost would I be looking at?



Comments

  • Registered Users, Registered Users 2 Posts: 12,948 ✭✭✭✭Calahonda52


    strict reading of the rules are that you can only have 2 connections of the rising main

    Kitchen sink and cold water tank

    “I can’t pay my staff or mortgage with instagram likes”.



  • Registered Users, Registered Users 2 Posts: 76,939 ✭✭✭✭FrancieBrady


    No expert but I would say tapping into the main before it enters house would be a potential issue due to water freezing but maybe proper insulation would be enough to prevent it. Personally I would want a way of isolating that tap in winter.



  • Registered Users, Registered Users 2 Posts: 40,607 ✭✭✭✭Mellor


    No planning needed.

    But needs to be supplied from insudevthe house, not the main.



  • Registered Users, Registered Users 2 Posts: 518 ✭✭✭St1mpMeister


    I have Italian imported tiles on the floors inside so wouldn't want to have these dug up to access the pipe, so I guess it's a no-go unless there's some other way of getting to the pipe



  • Registered Users, Registered Users 2 Posts: 47,202 ✭✭✭✭muffler


    Tee off the existing connection before it enters the house. Shouldn't be any issues.



  • Advertisement
  • Registered Users, Registered Users 2 Posts: 518 ✭✭✭St1mpMeister


    Needs an isolation valve right? What sort of cost would I be looking at?



  • Registered Users, Registered Users 2 Posts: 47,202 ✭✭✭✭muffler


    There aren't any valves on my connection but your plumber will know. I wouldn't be sure about the cost but a couple of hundred max should cover it.



  • Registered Users, Registered Users 2 Posts: 1,121 ✭✭✭rayjdav


    Very simple DIY process tbh.

    At boundary box, turn off water

    Locate the 25mm connection in your path where you want the tap, expose it (saw cut concrete/tarmac), cut pipe, use Philmac type T piece, connect pipes again and feed to tap (use PTFE tape on threads), install tap. No isolation valve required.

    Turn water back on at boundary box and feed to tap is now live.

    Reinstate concrete/tar to path.

    Materials cost (PTFE, T-Piece, Tap, Length of pipe, gravel/cement for reinstating path) much less than €50



  • Registered Users, Registered Users 2 Posts: 518 ✭✭✭St1mpMeister


    ehhhh no I ain't doing that myself 🤣



Advertisement