Removing window boards

Yellow_Fern

Hi all,

I have removed window boards in new builds but never in older homes. I am dealing with a typical 1980s concrete block house and I need to remove a window board with minamium damage to the hardwood board or the masonary/ plastering. Does anyone know how these were fixed at this time? There is visiable no screws or nails. Thanks all

IMG_20250124_111015.jpg

10-10-20

Screwed, filled and then stained, usually.

Sometimes you can find that they lift slightly when tapped from below. I had to drill relief holes around the screw-heads on mine last week as the heads were rounded off.

Yellow_Fern

So I managed to find a window frame from the house house that seems to have been held in with a sort of copper tube. I have never seen this before.

IMG_20250203_155515.jpg

IMG_20250203_155519.jpg

monseiur

https://www.boards.ie/discussion/comment/123131377#Comment_123131377

That's a teak window cill (not window board)- copper pipe is to drain the internal condensation from weep holes to outside. Window is probably from 1960's / 70's

Yellow_Fern

https://www.boards.ie/discussion/comment/123131412#Comment_123131412

That is really helpful. It is a late 1980s.