Lost channels

SCOOP 64

4seven and film4+1 seems to have gone from my Zgemma box.

dxhound2005

They were added to 10714 H on 11 Sept, and that will be the new frequency. They were removed from 10936 V on 24 Sept. Please check Lyngsat for changes if you lose more channels in future.

https://www.lyngsat.com/muxes/Astra-2E_UK_10714-H.html

https://www.lyngsat.com/muxes/Astra-2E_UK_10936-V.html

https://www.lyngsat.com/Astra-2E-2F-2G.html

Bellie1

Can I highjack this. Have lost lots of channels since the box was set up last year. How do I scan to get them back? A guy set up for us day one and I'm very nervous of losing what we have so have ignored but need to bite the bullet ! Using openatv skin

swoofer

Could you go menu setup information and read off image version and skin. Were your bouquets set up in a particular way? have you the channels you use most in favourites? say a few channels you lost.

It will help to explain what to do, and I set boxes up with BBCI London HD first

stanley1

menu > setup > reception > Manual Scan > Type of scan > single satellite > press green button for full scan on 28.2 Astra 2E/ 2F/ 2G

SCOOP 64

I've lost Now Xmas and Thats Dance, Don't know if Its my dish or frequency change.

greasepalm

Both working

https://en.kingofsat.net/pos-28.2E-fta.php

SCOOP 64

According to this it's been updated, but I still can't tune it in.

https://www.lyngsat.com/tvchannels/uk/Now-Christmas.html

swoofer

IMG_7605.jpg

I just tried and it’s there but with lots of other channels so may be over the page or are you getting no signal. If so check details carefully.

is that a zgemma h7s box?

SCOOP 64

No channels coming up on that search at all, only 2 channels that have gone missing are Xmas and Dance, all other channels fine, I have a Zgemma h2.

Do you know what frequencie you are using.

greasepalm

You can only use the working ones as wonder if yours are on a different one = Dead channel.

swoofer

Scoop54 I used the frequency you linked. I dug out a Zgemma H2S just now and put these details in see pic, I used signal finder. Using openatv 6.4 and the default skin called Metrix HD. When you put details in wait a good minute, if no signal shows then dish is out .

IMG_7614.jpg

I then scanned and got this.

IMG_7616.jpg

I then ran ABM and that now xmas is put under last scanned.

IMG_7619.PNG

good luck

SCOOP 64

https://www.boards.ie/discussion/comment/122926404#Comment_122926404

Thanks for that will give it another go tonight, did last night still no joy but didn't give it long enough maybe.

SCOOP 64

After a retune finally got them back, but i think it was my dish the wind has picked up here and now they tune in but they are in and out.

greasepalm

High winds are moving many dishes