FS: Tiagra 4700 Mechanical Groupset

Bluejohn1

Have 12 speed 105 crankset/chain/cassette to go with the Wheeltop EDS on the way, so looking to sell this nearly complete groupset. Bike has spent the last few years on the trainer and only been out over the summer. So all in good nick, bar some cosmetic marks.

• FD
• RD
• Crankset 50-34 170mm
• 2 11-34 cassettes
• 2 KMC 10 speed chains, one brand new unused
• Shifters

Looking for €130 for the lot.

oinkely

Would you take €100?

And any idea how i figure out a BB - current bike has traditional square taper so i'm guessing I'll be updating that!

blorg

Presuming your bike is BSA (it probably is if it has a square taper), and he's not including the BB with the crankset, you'd want one of these, they are quite cheap:

https://www.bike-discount.de/en/shimano-bb-rs500-bsa-hollowtech-ii-bottom-bracket-1

Bluejohn1

https://www.boards.ie/discussion/comment/122611118#Comment_122611118

Hey, I think the €130 is a reasonable price, but i'll go as low as €120. @blorg is right on the bb, I used an ultrega bb. All your missing with the above would be a bottom bracket, set of brakes and clamp for the FD, as I kept that for the new FD I got and just bought a braze on adapter.

oinkely

https://www.boards.ie/discussion/comment/122612116#Comment_122612116

where are you based? €120 is fine.

oinkely

Bike is a trek cross rip, so i assume its BSA and not some the italian one!

Bluejohn1

I had a look at a crossrip, I assume a sealed bb can just be replaced with a hollowtech if its bsa, only built one bike so not the most versed in bbs😅 I'm based Dublin, Firhouse.

Bluejohn1

Just to correct myself, the FD does have the clamp. Got mixed up and realised I bought a new clamp that had a braze on adapter.

Bluejohn1

Gonna move this to adverts.