Spool Valve Problem

Mach Two · 2024-04-24 11:43:09

Problem with a hydraulic spool valve on the back of a CASE MXU 100. The lever in the cab won't move far enough and hence move the cable enough to work the valve. It is hitting off the plastic housing in the cab. I am trying to adjust the cable end on the valve. Photos attached. The end nut will come off easily but the…

24-04-2024 12:43PM

#1

Mach Two

Registered Users, Registered Users 2 Posts: 787 ✭✭✭

Join Date: June 2017

Posts: 663

Problem with a hydraulic spool valve on the back of a CASE MXU 100. The lever in the cab won't move far enough and hence move the cable enough to work the valve. It is hitting off the plastic housing in the cab. I am trying to adjust the cable end on the valve. Photos attached. The end nut will come off easily but the other nuts around the cable seem to move together. Also the cable/steel bar is turning when I turn the nut. I was hoping to adjust the travel of the cable so the lever would not hit the plastic housing in the cab.s

0