Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Cold feed too combi boiler

Options
  • 30-01-2024 9:40pm
    #1
    Registered Users Posts: 985 ✭✭✭


    Hi

    just got viesmann gas combi boiler fitted.

    they pump is up in the attic which pumps down too combi.

    is the CW feed meant too hook up with the Cold feed too fixtures and t off too supply the combi also or should that be a separate supply ??



Comments

  • Registered Users Posts: 1,359 ✭✭✭Lenar3556


    The cold feed to the combi boiler will be the same as is suppling other cold water outlets in the property.

    Ideally, I would have the feed to the combi coming directly from the attic and connected close to the pump, as it may provide more stable pressure in use than a single pipe with T’s downstream. In practice however a good pump, and particularly a constant pressure model will solve most problems.



  • Registered Users Posts: 985 ✭✭✭Pinoy adventure


    Basically what we done is ran a 3/4 cold supply from pump in attic too the combi boiler in a below bed room.

    the cold supply too fixtures comes up underneath the boiler so will have too get the pumped 3/4 pipe into the combi and the easiest thing too do would be t it into the pipe which supples downstairs and the other outlet on the T into the boiler ?


    hot outlet on boiler is directly going too the hot fixtures including t bar thermostat shower in the house



Advertisement