Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

laminate flooring and underlay

  • 09-01-2024 04:57PM
    #1
    Registered Users, Registered Users 2 Posts: 300 ✭✭


    Hi all,

    Just wondering if there's any opinions or advice on the above.

    • Need 24sqm, have picked out a AC5 12MM 4 way V groove bevel, for downstairs, medium to high traffic. Should be fine for the everyday use. There was cheap stuff down before and a 2mm foam underlay.

    Was thinking of going for a heavier 5mm underlay gold foil to make more soundproofed.

    https://www.irishflooring.ie/product/super-gold-5mm-wood-flooring-underlay-15-sq-mtr/

    Wouldn't cause any issues would it with the click system with the laminate would it?

    Thanks



Comments

  • Registered Users, Registered Users 2, Paid Member Posts: 4,981 ✭✭✭...Ghost...


    As a closed cell foam, it shouldn't be an issue at all, as it's designed for your intended use. As long as the floor beneath is flat and solid (concrete) then plough on ahead.

    Stay Free



  • Registered Users, Registered Users 2 Posts: 2 JPCareyG


    I put the same down on a quite uneven floor with 2mm insulation and so far so good. The area I put down is low traffic.

    Agree with Ghost here, the flatter the floor before you lay it the happier the laminate will be



  • Registered Users, Registered Users 2 Posts: 300 ✭✭sirmixalot


    Yeah the floor is in good shape, well ok considering the sh!te that was on top of it. Been walking on the concrete the last 3 months so it has smoothed out some since.



  • Registered Users, Registered Users 2 Posts: 300 ✭✭sirmixalot


    if you guys care for a look :)

    20240118_152309.jpg 20240118_152255.jpg 20240118_152302.jpg




  • Registered Users, Registered Users 2 Posts: 300 ✭✭sirmixalot


    Also, was considering starting on the top right if this image, it's the longest straightest wall I have. Any others think different?

    20240118_161955.jpg




  • Advertisement
  • Registered Users, Registered Users 2 Posts: 5,397 ✭✭✭DublinDilbert


    I would snap a chalk line from the front door to the sitting room door and work off that line. Lay out the boards in the hall and make sure you are not going to have a really small cut along one wall etc... some floors lay easier one direction than the other, so make sure you start in the correct direction to speed up laying.

    The top right is an alcove that will probably have plants furniture so won't really be noticed, but the front door will.



  • Registered Users, Registered Users 2 Posts: 300 ✭✭sirmixalot


    Thanks for that DD, This is more or less to scale, I'll not lay it like this but gives you an idea or the widths of the planks (188 WIDE)

    10MM spacing will be

    FLOOR 2.png

    accommodated where it needs it, also the far all will finish with a less, about 100mm but will have furniture at that wall so all good.



  • Registered Users, Registered Users 2 Posts: 5,397 ✭✭✭DublinDilbert


    That looks the part. Just be careful as often one or more of the walls will run off in some direction. Snap a chalk line from the front door to the sitting room and take some measurements from this to check things are parallel and will look ok.



  • Registered Users, Registered Users 2 Posts: 300 ✭✭sirmixalot


    Forgot to post a pic, finished this awhile back. Few mistakes on cutting first off but soon got the hang of it. Thanks to all who gave advice on this.

    20240226_195159.jpg




Advertisement