Water nozzle issue

masterboy123

Hi All,

I am looking for help as I am unable to connect the water sprinkler I got from screwfix. The hose pipe head is different (it says 3/4 on the brass in the pictures below). Any idea what connector I need? Pictures below.

The Continental Op

... sorry misunderstood the question.

masterboy123

https://www.boards.ie/discussion/comment/120497582#Comment_120497582

https://www.screwfix.ie/p/titan-oscillating-sprinkler-125m-/723pt#product_additional_details_container

This is the product. I am unable to open up the black 1/2" connection hose. Do I need to apply a lot of force?

The Continental Op

That hose is fairly non standard. With that end with the valve and the screw thread you'd usually treat it like you were making a connection to a tap. So I'd put either of the bottom two brass fittings on the valve (if they fit) then a short length of hose to get you back to the realms of standard hose fittings so you can put the orange push fitting on the end of the hose.

It is possible that the valve on the end of the hose will fit directly into the lawn queen (old name for oscillating sprinkler) if you remove the black male push fit fitting first. Note the flats on the fitting thats in the end of the lawn queen. If the fitting doesn't come out of the lawn queen easily don't force it as it may be glued in.

The female part of this https://www.amazon.co.uk/DTXLX-Connectors-Connector-Fittings-Irrigation/dp/B08NHPZT44/ may fit on the end of that valve that says 3/4 on it and go directly on the existing lawn queen push fir male connector..

greasepalm

All of these companies want you to use one brand only as the fittings differ and wont/dont mate together.

On picture 1 the black bit looks like it screws off with a spanner and if you know the name of the water system is in use buy the same one in that make to screw on in its place.

masterboy123

https://www.boards.ie/discussion/comment/120497718#Comment_120497718

Thanks.

From what I have it seems its not possible to connect and the black part on the sprinkler is very tightly attached.

It seems its best I get a new hose system. Would hoselock hose pipe system work? It's on sale at the moment

https://www.screwfix.ie/p/hozelock-2-in-1-reel-with-hose-25m/63087?tc=AI8&gclid=CjwKCAjwov6hBhBsEiwAvrvN6K5T4SkY5x776QtgrGL1BQkxswPAfuKPOnt7e282yCKprTG8sLGB1hoC2HAQAvD_BwE&gclsrc=aw.ds

Jim_Hodge

https://www.boards.ie/discussion/comment/120497895#Comment_120497895

Hozelock is exactly what you need. Your current Hose set up is most unusual and you'll get very little to fit with it.

masterboy123

https://www.boards.ie/discussion/comment/120497969#Comment_120497969

Perfect. I will get Hozelock so.

The wall mounted looks great but they are pricey. I will search for deals.

standardg60

https://www.woodies.ie/hose-and-tap-connector-set-1158403

Op you just need one of these, the tap connector will screw on to the hose end (just remove the 1/2 inch adapter). All you need then is a foot of 1/2inch hose to connect the hose to the sprinkler with the female connectors.

There's nothing unusual about a 3/4 inch fitting, most tap connectors consist of two pieces, the inner one is 3/4 inch thread and the outer is 1/2, indeed the hozelock one pictured has this set-up.

masterboy123

https://www.boards.ie/discussion/comment/120498315#Comment_120498315

Thanks so much.

The brass 3/4 connector is permanently attached to the garden hose, I would have to cut it with a scissor.

I think getting the Hozelock will be a simpler and "confirmed to work" option.

The Continental Op

https://www.boards.ie/discussion/comment/120499073#Comment_120499073

If you ever cut that then existing hose I doubt you'll ever find another fitting it will work with.

standardg60

https://www.boards.ie/discussion/comment/120499073#Comment_120499073

You don't have to cut anything, the connector will screw on to your 3/4 brass connector just fine.