HiFly Surfboard fins

tonyfillony

Morning all ,
I have an old hifly surfboard that my daughter wants to use . unfortunately all the fins are broken on it . These fins screw in at the top so I don't think FCS fins will do , does any one know where i can get replacement fins?

spaceHopper

tonyfillony wrote: »

Morning all ,
I have an old hifly surfboard that my daughter wants to use . unfortunately all the fins are broken on it . These fins screw in at the top so I don't think FCS fins will do , does any one know where i can get replacement fins?

Put up a picture of the fin box.

tonyfillony

https://imgur.com/vBsfTvh

https://imgur.com/SGwBlG8
Here you go

rodento

All I can suggest is buy a cheap set of fins and trim the box ends back into they slot in place

Carolipino

Hi Tonyfillony, I have exactly the same problem. How did you solve it? Is there any fin type which is easy to adjust to this system? Thanks a lot!

spaceHopper

@Carolipino

Bit expensive but will these do. https://www.decathlon.ie/surfboard-fins/1267-181282-100-soft-edge-fins-for-pour-foam-boards.html#/demodelsize-254no_size/demodelcolor-8577332

or these

https://www.amazon.de/iBOARD-Surfboard-Accessories-Screws-Wrench/dp/B08L3GXWNQ/ref%3Dsr_1_2_sspa?crid=3ILMHBV8YIAD1&keywords=surfboard%2Bfine&qid=1701181891&sprefix=surfboard%2Bfine%2Caps%2C92&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

tonyfillony

I bought these

https://surftech.com/products/nsp-mini-tuttle-fin-fcs-adaptor

then had to remove old broken fins , had to cut a bit of the slots away and then put the adaptors in . Bit of a song and dance to it

Carolipino

Hi all, thanks a lot for your input! I will try my best! :-)

Thelonious Monk

i now have this issue having lost fins. what kind of fins did you end up using?

https://www.boards.ie/discussion/comment/121494950#Comment_121494950

tonyfillony

FCS