Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

HKC Sabb wired sounder LED lights

  • 03-04-2021 10:09PM
    #1
    briano66
    Registered Users, Registered Users 2 Posts: 1 ✭


    Hi All,
    Hopefully someone will know the answer to this question.
    I've installed a new HKC SABB wired sounder. I was hoping that the LEDs would have a different sequence when armed & disarmed. Mine alternate left right about every second or so, irrespective of whether the alarm is armed or not. Is that correct and how they normally work?
    Can I configure the board to only power the LEDs when the alarm is actually armed? If not, can I add another LED to show the alarm is armed? The alarm is fitted to my shed which is about 150M from my house and I want to be able to confirm that the alarm is on without opening the doors. Different people have access to the building and I just want to be able to see the shed is armed at night from the outside of the building.
    Thanks.


Comments

  • #2
    kub
    Registered Users, Registered Users 2 Posts: 6,581 ✭✭✭kub


    briano66 wrote: »
    Hi All,
    Hopefully someone will know the answer to this question.
    I've installed a new HKC SABB wired sounder. I was hoping that the LEDs would have a different sequence when armed & disarmed. Mine alternate left right about every second or so, irrespective of whether the alarm is armed or not. Is that correct and how they normally work?
    Can I configure the board to only power the LEDs when the alarm is actually armed? If not, can I add another LED to show the alarm is armed? The alarm is fitted to my shed which is about 150M from my house and I want to be able to confirm that the alarm is on without opening the doors. Different people have access to the building and I just want to be able to see the shed is armed at night from the outside of the building.
    Thanks.


    As per EN 50131 standard, there can be no indication on an alarm system that is is armed or not at any time in full set mode.

    The LED's on a bell box do not and cannot be configured that way, their function is purely as a deterrent.


Advertisement