Advertisement
Boards Golf Society are looking for new members for 2022...read about the society and their planned outings here!
How to add spoiler tags, edit posts, add images etc. How to - a user's guide to the new version of Boards

Recommendations Door frames & Doors Supply & Fit

  • #1
    Registered Users Posts: 617 ✭✭✭ LenWoods


    Hi all,
    I've got three pine interior door frames and doors on the ground floor of my three bed semi detached house which I would like to have replaced with oak.

    I've stripped down the area to the concrete floor and removed the saddle boards which I won't be having on the replacements,

    The hall and kitchen will be tiles and living room; semi solid flooring, however all of that is currently on hold as I need to get the door frames in.

    I'm looking for recommendations now of places that can supply and fit some oak door frames with a choice of doors,
    Preferably rebated door frames rather than the plain frame with strip nailed on as is currently the construction of the pine.

    Thanks in advance for response,
    Also if anyone can provide a rough estimate I'd appreciate that too,


Comments



  • Murphy Larkin sell solid Oak rebated door frame @189, and Oak doors from 120 to 400, hinges and handles 50 to whatever you want, I don't know what they charge for fitting , probably 150 upwards.




  • Murphy Larkin sell solid Oak rebated door frame @189, and Oak doors from 120 to 400, hinges and handles 50 to whatever you want, I don't know what they charge for fitting , probably 150 upwards.

    Hi,
    Thanks for responding that's excellent; I'll have a look,
    I need to get them done soon as everything else is now held up until they go in.
    Thanks for your time.




  • Murphy Larkin sell solid Oak rebated door frame @189, and Oak doors from 120 to 400, hinges and handles 50 to whatever you want, I don't know what they charge for fitting , probably 150 upwards.

    Hi,
    Just returning to say thank you very much for your recommendation towards Murphy Larkin,
    I logged on to there website soon after reading this thread and was able to order everything required for the improvements we wanted to make to downstairs,

    The staff were very helpful and they delivered everything within two weeks order all arrived in there own van with a very accommodating delivery man whom put everything where we wanted it inside the house,

    There fitting service is booked up for the foreseeable future they said,
    So we sourced a local carpenter whom is doing a fantastic job in fitting today and returning tomorrow

    pnhuUQeBj

    pouVjocrj

    pno80uqJj

    pnJ1j8nVj

    pne7fHxAj

    The steel designer Radiator's & valves are manufactured by Milano purchased via bestheating.ie much improved heat output compared to standard due to the increased surface-air contact from there independent banister design, the wall can be saw through the gaps in the radiators.
    Just thought I'd add that information incase future readers are interested.
    And the sample pot of neon red paint was used to mark the location of heating pipes and sattelite cables running inside the wall at the back of the skirting to be sure no nails are driven at that point.

    poaMFYx5j

    I've gotten 3 metre lengths of skirting boards from Murphy Larkin so there's no joints mid section on the walls, all clean lines, going to look sweet

    Edit with updated pictures of the following day,
    Looks excellent, just haven't got the kitchen door fitted yet because the leed time for the one we wanted was twelve weeks with Murphy Larkin, so we bought it from a different supplier whom sent out the wrong size and now we're chasing them for the correct one .

    pogFqGlGj

    pmaebAecj

    pmSEx5Daj

    pn9sxoJZj

    pm08Fb0Sj


Advertisement