WTD: Road bike wheels

Mr. Cats

Am looking for a set of wheels (clinchers) for a lightweight build. Must be in very good condition. Thinking of going with one of the Chinese carbon manu’s (Lightbicycle) but wanted to check if there’s anything out there first? Open to carbon or alu but looking to keep weight down so definitely not more than 1500g. Thanks

MojoMaker

Deep or shallow?

Any preference for hubs?

Mr. Cats

MojoMaker wrote: »

Deep or shallow?

Any preference for hubs?

Preferably anything 35 or above depth but would consider shallower if good gain on weight side. Was looking at some dt 240s on the build but again I’m open.

denbatt

I have a pair of Prime RR38 i was thinking of selling. Used but it good nick. Havent used them in months because I was ages finding bearings for the front. I replaced them and hung them up. I even picked up a spare pair of bearings for the front. Casette body has a little bit of chew but still usable. I found them a very decent wheel. https://www.chainreactioncycles.com/mobile/ie/en/prime-rr-38-v3-carbon-clincher-wheelset/rp-prod193826?gs=1&sku=sku767878&pgrid=55940684301&ptaid=aud-967909798245:pla-414704720316&utm_source=google&utm_term=&utm_campaign=PLA+All+Products&utm_medium=base&utm_content=mkwid|sHcRlKwWr_dm|pcrid|490616783745|pkw||pmt||prd|767878IE&gclid=CjwKCAiAo5qABhBdEiwAOtGmbp6FOgAyX0TbK-_9OeDCJfnNo5Uwk3AhVQ5Nl9KH2o89-KD7X49EeBoCfhcQAvD_BwE
I was going to throw them up to see if anyone was interested.

denbatt

Cee-Jay-Cee

denbatt wrote: »

I have a pair of Prime RR38 i was thinking of selling. Used but it good nick. Havent used them in months because I was ages finding bearings for the front. I replaced them and hung them up. I even picked up a spare pair of bearings for the front. Casette body has a little bit of chew but still usable. I found them a very decent wheel. https://www.chainreactioncycles.com/mobile/ie/en/prime-rr-38-v3-carbon-clincher-wheelset/rp-prod193826?gs=1&sku=sku767878&pgrid=55940684301&ptaid=aud-967909798245:pla-414704720316&utm_source=google&utm_term=&utm_campaign=PLA+All+Products&utm_medium=base&utm_content=mkwid|sHcRlKwWr_dm|pcrid|490616783745|pkw||pmt||prd|767878IE&gclid=CjwKCAiAo5qABhBdEiwAOtGmbp6FOgAyX0TbK-_9OeDCJfnNo5Uwk3AhVQ5Nl9KH2o89-KD7X49EeBoCfhcQAvD_BwE
I was going to throw them up to see if anyone was interested.

How much?

Mr. Cats

denbatt wrote: »

I have a pair of Prime RR38 i was thinking of selling. Used but it good nick. Havent used them in months because I was ages finding bearings for the front. I replaced them and hung them up. I even picked up a spare pair of bearings for the front. Casette body has a little bit of chew but still usable. I found them a very decent wheel.

I was going to throw them up to see if anyone was interested.

They look really nice but not exactly what I’m after. Looks like there might be some other interest here though.

Trekker09

I might have a set of near new Vision Metron SL available shortly. They're a Campy freehub though

micase

I have a set of Shamal Mille that I’m thinking about selling.Carbon hubs,ceramic bearings, wheelbags,and brake pads.

Mr. Cats

Trekker09 wrote: »

I might have a set of near new Vision Metron SL available shortly. They're a Campy freehub though

I’m looking for shimano hub but might be possible to replace I suppose? What depth are they? What’s your asking price?

Galego

denbatt wrote: »

I have a pair of Prime RR38 i was thinking of selling. Used but it good nick. Havent used them in months because I was ages finding bearings for the front. I replaced them and hung them up. I even picked up a spare pair of bearings for the front. Casette body has a little bit of chew but still usable. I found them a very decent wheel. https://www.chainreactioncycles.com/mobile/ie/en/prime-rr-38-v3-carbon-clincher-wheelset/rp-prod193826?gs=1&sku=sku767878&pgrid=55940684301&ptaid=aud-967909798245:pla-414704720316&utm_source=google&utm_term=&utm_campaign=PLA+All+Products&utm_medium=base&utm_content=mkwid|sHcRlKwWr_dm|pcrid|490616783745|pkw||pmt||prd|767878IE&gclid=CjwKCAiAo5qABhBdEiwAOtGmbp6FOgAyX0TbK-_9OeDCJfnNo5Uwk3AhVQ5Nl9KH2o89-KD7X49EeBoCfhcQAvD_BwE
I was going to throw them up to see if anyone was interested.

I'd also like to hear how much for these. Thanks

Mr. Cats

micase wrote: »

I have a set of Shamal Mille that I’m thinking about selling.Carbon hubs,ceramic bearings, wheelbags,and brake pads.

How old are these? Much mileage? Thanks

Trekker09

Mr. Cats wrote: »

I’m looking for shimano hub but might be possible to replace I suppose? What depth are they? What’s your asking price?

They're 40mm full carbon. Asking €850 as they are as new. Shimano freehub is around €50

micase

Re Shamals, don't know exact age I bought them second hand from someone who had them for The Marmotte. I've only had them out for a few spins so the brake track is unmarked.Currently have Michelin Pro tyres.

ricardospeedo

micase wrote: »

Re Shamals, don't know exact age I bought them second hand from someone who had them for The Marmotte. I've only had them out for a few spins so the brake track is unmarked.Currently have Michelin Pro tyres.

Price ?

micase

500 firm. No cassette.

Mr. Cats

micase wrote: »

500 firm. No cassette.

Could you put up some pictures?

micase

Get some tomorrow.

micase

Photos. As I said only thinking about selling these at the moment

micase

More

letape

micase wrote: »

More

Do you know if the internal rim width is 13mm or 17mm (should be a sticker on rim that confirms)?

Thanks

micase

letape wrote: »

Do you know if the internal rim width is 13mm or 17mm (should be a sticker on rim that confirms)?

Thanks

Think that they are 13mm. The only sticker I can see is 013. I'm running 25mm tyres.

iwillhtfu

micase wrote: »

500 firm. No cassette.

Hopefully not stepping on any toes here but I'll offer asking on those if you do decide to sell. I think I picked up a set of Mavic SLRs off off you before.

micase

Thanks going to decide overnight what I’m doing. Hope you got good use out of the Mavics.

iwillhtfu

micase wrote: »

Thanks going to decide overnight what I’m doing. Hope you got good use out of the Mavics.

They're an excellent wheelset, I was going to pick up another set but always fancied a set of shamal mille ever since I saw a set LeTape (I think it was) had for sale.

Mr. Cats

Trekker09 wrote: »

They're 40mm full carbon. Asking €850 as they are as new. Shimano freehub is around €50

Could you post some photos?

Trekker09

This is the only poc I have at the moment. I can upload more when I get home later

iwillhtfu

A little over the weight allowance but these look decent and I know they've been bought by a few on here.

https://www.chainreactioncycles.com/ie/en/prime-rr-50-v3-carbon-clincher-wheelset/rp-prod193825

Mr. Cats

Trekker09 wrote: »

This is the only poc I have at the moment. I can upload more when I get home later

Thanks for that - have been researching them and looks like a great price for the wheelset. I’m after getting sorted elsewhere but someone else reading here might be interested if you’re still thinking of selling.