Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

TV Mount Corner Conundrum

  • 28-12-2020 9:53pm
    #1
    Registered Users, Registered Users 2 Posts: 99 ✭✭


    I’m looking to mount my TV on the corner stud of a hollow plasterboard ‘pillar’ in my living room (this is the only space as there’s a door to the left and a brick wall/stove to the right), but need a quick sanity check so any thoughts are much appreciated!

    In the first picture below you can see the single stud TV mount I’ve bought for my 37” 11.1kg TV. In the second picture is the corner/pillar in question. I’ve marked where I intend to install the bracket with two lag bolts into the corner stud, and where I assume wiring is run for the mains sockets at the base of the pillar (there’s also a light switch just out of shot to the left in case that might indicate anything else).

    I want good support for the TV as there will be a hi-fi with turntable beneath but don’t want to do anything too drastic if I can avoid it (it’s a rented house) so I thought going off the corner stud would do the trick rather than buying an expensive corner TV mount or installing a plywood backboard between two of the pillar studs

    Thanks in advance for any advice :)


Comments

  • Registered Users, Registered Users 2 Posts: 1,017 ✭✭✭Four Phucs Ache


    Rented or not, I'd go with the brick on the right.Easier to hide the holes if future tenants etc.Holes in the plaster will need filling and wall painted.

    8mm drill bit, plugs and 60mm bolts. The swivel of the bracket you have will give whatever view you want wether it's in the plaster or the brick.


  • Registered Users, Registered Users 2 Posts: 27,370 ✭✭✭✭GreeBo


    Easier to hide holes in redbrick wall then plasterboard?
    I'd disagree totally, you can do an invisible repair on any plasterboard wall by colour matching the paint, I dunno how you would do that with a redbrick wall?
    The only way repair option I see would be into the mortar and I wouldn't trust my TV and hi-fi on that.

    OP I'd fit some timber horizontally between the external and internal corner studs and then fix your bracket to that. That gives you any horizontal position you want and easy to patch up. It also halves the load on each stud (not that you should need that with an 11kg TV, but at full extension there is a good bit more than 11kg of force)


  • Registered Users, Registered Users 2 Posts: 1,017 ✭✭✭Four Phucs Ache


    To hide a hole on internal red brick, use a wire brush on one of the bricks not in sight, collect the dust and mix with a pea sized bit of filler. Fixed.


  • Administrators Posts: 54,424 Admin ✭✭✭✭✭awec


    A repair on plaster will be completely invisible, you can very easily make it absolutely perfect. Red brick not so much.

    I would avoid drilling into the brick if at all possible.


  • Registered Users, Registered Users 2 Posts: 99 ✭✭smck99


    Thanks for the replies. I’d be inclined to stick to mounting from the plasterboard. Nice tip about blending a repair from some other bricks though.

    As GreeBo mentioned and I was originally too lazy to do, I think I’ll cut two 2x4 to size and mount across two studs, then mount the TV on that.


  • Advertisement
Advertisement