Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Fire door query

  • 26-11-2020 6:02pm
    #1
    ryange
    Registered Users, Registered Users 2 Posts: 86 ✭✭


    As part of attic conversion I have to add fire doors to ground and first floor. My problem is that the doors on ground floor are 2" thick pine approx 8' tall gothic design arches and hand made. Is there any way to fire proof these internal doors to Irish regulations without having to get them custom made again as fire doors. Can they be sprayed with special paint or is that only an option in the UK.


Comments

  • #2
    Calahonda52
    Registered Users, Registered Users 2 Posts: 12,877 ✭✭✭✭Calahonda52


    I am no expert here, just going on what I see.

    just wonder why do you think 2" solid pine won't cut it?
    You will need to have intumescent strips rebated into the frame or and door as required.

    You also need to select the proper door closers.

    “I can’t pay my staff or mortgage with instagram likes”.



  • #3
    Del2005
    Registered Users, Registered Users 2 Posts: 19,100 ✭✭✭✭Del2005


    Calahonda52 wrote: »
    I am no expert here, just going on what I see.

    just wonder why do you think 2" solid pine won't cut it?
    You will need to have intumescent strips rebated into the frame or and door as required.

    Won't they need to be certified to cut it? Was the manufacturer registered for fire safe doors?


  • #4
    glynf
    Registered Users, Registered Users 2 Posts: 3,387 ✭✭✭glynf


    ryange wrote: »
    As part of attic conversion I have to add fire doors to ground and first floor. My problem is that the doors on ground floor are 2" thick pine approx 8' tall gothic design arches and hand made. Is there any way to fire proof these internal doors to Irish regulations without having to get them custom made again as fire doors. Can they be sprayed with special paint or is that only an option in the UK.

    You can get existing fire doors inspected by a specialist, have seen it done on a job where we had to change out the factory fitted abloy locks on site as they were the wrong spec., guy came to site to re-certify the doors for the door supplier. This was for access controlled fire doors on a commercial job, normally to keep the manufacturers cert, any drilling for locks and hardware has to be done in the factory.

    I assume its different for a domestic job, chances are it's not as strict and strips and hinges may be all that's required to change.
    I would suggest looking online for someone in that area, may be able to advise you on the best option.


Advertisement