WTD: Ultegra 6700 chainset

TooObvious

As it says, need a 10 speed shimano chainset, standard or compact - not fussed. It's for the winter build.

If anything has anything let me know.

Thanks!

benneca1

TooObvious wrote: »

As it says, need a 10 speed shimano chainset, standard or compact - not fussed. It's for the winter build.

If anything has anything let me know.

Thanks!

I have a 105 compact chainset if you are interested AFIK all in the box pulled it off a couple of years ago to replace with SRAM red. Might have some ultegra bits

benneca1

IN fact just opened the box to check it is Ultegra the only 105 bit is the levers drive chain is ultegra

magicbastarder

i only recently learned that there's no real difference between a 10 and 11 speed crankset. the width difference between a 10 speed and 11 speed chain is the outer width, not the inner width, which is not a concern with a chainset (it is for a cassette though).

https://cyclingtips.com/2017/12/mixing-road-groupsets-what-works-together-and-what-doesnt-2/

TooObvious

benneca1 wrote: »

IN fact just opened the box to check it is Ultegra the only 105 bit is the levers drive chain is ultegra

Would be interested than in the chainset if available - as long as in decent looking conditions (aesthetics important!) and won't need rings replaced next week! Can you PM me price and location? Maybe send a pic with the other Ultegra bits as well?? Might be tempted by them also.

Yes - 10 & 11 Cranksets both work with 10 speed. Have done this before - no problems with it.

benneca1

I would need €60.00 for crankset €120 for lot. Two derailleurs long and short cage front mech 2 105 brake calipers 2 ultegra levers Bottom bracket and chain- few scuffs and marks but functionality good. I am in Co Meath

TooObvious

120 for the lot.

Yeah, I'd do that. All looks well, i'd say most of the bits would clean up a bit as well.

Now - the problem is I'm in Kildare. I'm trying to stick by lockdown, I think we are being extended by 2 weeks today also. Could you wait a few weeks?

David

benneca1

No problem if you are not in a hurry just pm me when you are able to move

RobFowl

105 10 speed chainset if that falls through
Alloy and used but good condition
172.5 and 52/39
30 quid

Galego

benneca1 wrote: »

I would need €60.00 for crankset €120 for lot. Two derailleurs long and short cage front mech 2 105 brake calipers 2 ultegra levers Bottom bracket and chain- few scuffs and marks but functionality good. I am in Co Meath

If TooObvious changes his mind or fails to collect it I'll take it all. I am in Meath too.

TooObvious

Super, thanks for that. I definitely will be stuck in lockdown alright, and can't finagle a work reason to go to Meath unfortunately.

benneca1

Are you still interested now lockdown is over for you

TooObvious

Sorry, for the delay. Yes lockdown is over, but I actually went off and bought a new crank last night! I have all the other stuff so won't need this now. Sorry about that. The frame I got was just too shiny to be putting old bits on! Looks like you have a lot of interest otherwise.

Thanks again.

Galego

@benneca1

I'll take it off you.

PM me please whenever suits you for me to come around and collect it.

whodaman2

Still available?

benneca1

Sold have a 6800 dunno if same look to be

nicksnikita

benneca1 wrote: »

Sold have a 6800 dunno if same look to be

Hey, have you got any parts left?
If you list what you have, I may be interested.
Thanks, Nick

Paul Kiernan

RobFowl wrote: »

105 10 speed chainset if that falls through
Alloy and used but good condition
172.5 and 52/39
30 quid

Robfowl, is this still available? Thanks, Paul

benneca1

nicksnikita wrote: »

Hey, have you got any parts left?
If you list what you have, I may be interested.
Thanks, Nick

Nick I never got round to cleaning and photoing it. Its a full groupset levers shifters calipers crankset etc. Pulled off bike and put in box.
With lockdown and all I kind of gave up If you're stuck for something get back to me
l '

nicksnikita

benneca1 wrote: »

Nick I never got round to cleaning and photoing it. Its a full groupset levers shifters calipers crankset etc. Pulled off bike and put in box.
With lockdown and all I kind of gave up If you're stuck for something get back to me
l '

Thanks for the reply.
Are the remaining parts 6700 or 6800? (Apologies - the thread gets difficult to follow there)
Either way if you list what you have, we can sort something out. Photos would be a bonus
Cheers, Nick

RobFowl

Paul Kiernan wrote: »

Robfowl, is this still available? Thanks, Paul

It is
Just sitting there tbh

MojoMaker

Very good condition dark grey 6700 39/53 in 170mm length here if needed.

wersal gummage

Any of you with 6700 groups on offer have a cassette?? Ultegra or 105, just looking for a good condition 10 speed if anything on offer before ordering online

nicksnikita

wersal gummage wrote: »

Any of you with 6700 groups on offer have a cassette?? Ultegra or 105, just looking for a good condition 10 speed if anything on offer before ordering online

I have an Ultegra 11-28T cassette here. Excellent condition. €30 including postage. Can be sent today.
Cheers, Nick

wersal gummage

nicksnikita wrote: »

I have an Ultegra 11-28T cassette here. Excellent condition. €30 including postage. Can be sent today.
Cheers, Nick

I'll take that, thanks. If you are based around Central Dublin I could collect (still 30 is OK for me).

25sean

Coming late.. is there a compact chainset left?!