Wtd: few road bike bits and bobs

thehamo

Looking for seat post, bars (wide as possible 44 or 46) and stem, bar tape, skewers. Nothing too high end!

Lets hear what you have ta.

dahat

I think I have a Giant stem 110 with one or two stem bolts missing.

I also have almost high viz green bar tape if that's your cup of tea.

€10 for both?

MojoMaker

Few items on your list hamo - tenner each and all in very good nick.

Couple of stems here - Deda01 and Cannondale C3 - both 100mm

Deda RHM02 bars - 440mm

Campagnolo skewers from a set of Zondas, pretty sure I have both front and rear.

West Dublin based if you're around at all.

Deano12345

What sized Seatpost? I’ve a selection of them at this stage!

koutoubia

3T handlebars 44 wide.
130mm stem to match or 110 deda stem.
Loads of skewers.

rayman1

I have a Cube seat post, 350mm long, 27.2mm diameter. Would post for €25.
Also have 100mm Giant Contact stem, 100mm Cube CPS Pro stem, 110mm Ritchey stem. €10 each.

MojoMaker

koutoubia wrote: »

3T handlebars 44 wide.

That's gas. I put up a post here looking for 44cm 3T bars a couple of months ago and there was nowt to be had!

Shallow/compact?

koutoubia

MojoMaker wrote: »

That's gas. I put up a post here looking for 44cm 3T bars a couple of months ago and there was nowt to be had!

Shallow/compact?

They were still on the bike at the time!
will pm ya

ckeego

I have a couple of 3T seatposts. BNIB.

Also an as new Ritchey WCS stem.

ridelikeaturtle

thehamo wrote: »

Looking for seat post, bars (wide as possible 44 or 46) and stem, bar tape, skewers. Nothing too high end!

Lets hear what you have ta.

I've got a 46cm bar, ITM Super Italia Pro-2 Anatomica 46cm.

I also just listed a couple 3TTT Status Quill stems on eBay, 115mm and 100mm.

Let me know if you're interested.

thehamo

ridelikeaturtle wrote: »

I've got a 46cm bar, ITM Super Italia Pro-2 Anatomica 46cm.

I also just listed a couple 3TTT Status Quill stems on eBay, 115mm and 100mm.

Let me know if you're interested.

Hey, how much for the bars?

thehamo

Also, im gonna throw a shimano bottom bracket request in the mix

thehamo

ckeego wrote: »

I have a couple of 3T seatposts. BNIB.

Also an as new Ritchey WCS stem.

Prices?

ridelikeaturtle

thehamo wrote: »

Hey, how much for the bars?

20 euro would do it.

thehamo

ridelikeaturtle wrote: »

20 euro would do it.

Thanks, sounds good. Where are you based?

ridelikeaturtle

thehamo wrote: »

Thanks, sounds good. Where are you based?

I'm in north Dublin city, Killester/Clontarf/Donnycarney.

ckeego

thehamo wrote: »

Prices?

The Ritchey stem is €40. As new.

3T seatpost is a 31mm.. Still boxed. €40.

thehamo

ridelikeaturtle wrote: »

I'm in north Dublin city, Killester/Clontarf/Donnycarney.

Ah yeah sound im only up the road in Glasnevin. Ill send you a p.m.

Euppy

I think you are sorted but have 44cm ITM handlebars and a felt 100mm stem and can throw in skewers all for €20

letape

MojoMaker wrote: »

Few items on your list hamo - tenner each and all in very good nick.

Couple of stems here - Deda01 and Cannondale C3 - both 100mm

Deda RHM02 bars - 440mm

Campagnolo skewers from a set of Zondas, pretty sure I have both front and rear.

West Dublin based if you're around at all.

Interested in the skewers if op isn’t - thanks

thehamo

letape wrote: »

Interested in the skewers if op isn’t - thanks

Yeah fire away

thehamo

Update: bars i bought are the wrong size i need 31.8 for the stem i have. Typical.

So.

Still in the market for a set off 44 or 46 cm bars 31.8

Also still on the hunt for 34.9 seat post

Set of skewers.

Tia

Euppy

Offer above still stands

thehamo

Euppy wrote: »

Offer above still stands

What size are they ITM bars? Theyre the bars i bought but too small

ridelikeaturtle

thehamo wrote: »

Update: bars i bought are the wrong size i need 31.8 for the stem i have. Typical.

So.

Still in the market for a set off 44 or 46 cm bars 31.8

Also still on the hunt for 34.9 seat post

Set of skewers.

Tia

Aw crap, that's a bummer.

I have a set of Cinelli Vai bars that take a 31.8mm clamp, they're 42 c-c, but 44.5cm overall outside-to-outside.

Would they be any use to you? I'd be happy to swap them for the ITM you got off me.

Euppy

thehamo wrote: »

What size are they ITM bars? Theyre the bars i bought but too small

I confirm these are 31.8mm

thehamo

ridelikeaturtle wrote: »

Aw crap, that's a bummer.

I have a set of Cinelli Vai bars that take a 31.8mm clamp, they're 42 c-c, but 44.5cm overall outside-to-outside.

Would they be any use to you? I'd be happy to swap them for the ITM you got off me.

That would be extremely sound of you if you wouldn't mind?

ridelikeaturtle

thehamo wrote: »

That would be extremely sound of you if you wouldn't mind?

Sorry for the late reply - but sure it's no problem. Same place, same time?

MojoMaker

letape wrote: »

Interested in the skewers if op isn’t - thanks

Can't find the skewers, sorry Hamo and letape.

Other stuff there if you need it Hamo.