Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Drill concrete stakes.

  • 13-05-2020 5:08pm
    #1
    Moderators, Home & Garden Moderators Posts: 6,378 Mod ✭✭✭✭


    Can concrete fence stakes be drilled and a red wall plug inserted?
    I could use existing holes, but not near as useful as drilling would be.

    Please follow site and charter rules. "Resistance is futile"



Comments

  • Registered Users, Registered Users 2 Posts: 105 ✭✭Shamboo1801


    Wearb wrote:
    Can concrete fence stakes be drilled and a red wall plug inserted? I could use existing holes, but not near as useful as drilling would be.


    I have mine done. Have 3ft channels fixed into them to give me extra height for a clothes line.


  • Registered Users, Registered Users 2 Posts: 12,888 ✭✭✭✭Calahonda52


    I assume there is rebar in them so just avoid that.

    “I can’t pay my staff or mortgage with instagram likes”.



  • Moderators, Home & Garden Moderators Posts: 6,378 Mod ✭✭✭✭Wearb


    I assume there is rebar in them so just avoid that.

    Any tips on how to avoid them?

    Please follow site and charter rules. "Resistance is futile"



  • Registered Users, Registered Users 2 Posts: 23,688 ✭✭✭✭mickdw


    Get an sds drill and you will drill them no bother.
    Id use an 8mm bit with brown plug.
    Try drilling centre of post. If you hit steel there, offset from
    Centre line and you should be clear. Id say you be ok drilling centre though.


  • Registered Users, Registered Users 2 Posts: 73,520 ✭✭✭✭colm_mcm


    Wearb wrote: »
    Any tips on how to avoid them?

    Could be anywhere in them, no big deal if you hit it, you just won’t be able to go any further, just go again.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 105 ✭✭Shamboo1801


    Wearb wrote:
    Any tips on how to avoid them?


    I have mine drilled dead centre and avoided the rebar. Luck, or not, I couldn't tell ya!


  • Posts: 7,499 ✭✭✭ [Deleted User]


    mickdw wrote: »
    Get an sds drill and you will drill them no bother.
    Id use an 8mm bit with brown plug.
    Try drilling centre of post. If you hit steel there, offset from
    Centre line and you should be clear. Id say you be ok drilling centre though.

    Why choose 8mm over 6mm without knowing the application ?


  • Registered Users, Registered Users 2 Posts: 23,688 ✭✭✭✭mickdw


    Mostly because the 8mm brown plug will take a big range of screws and should work from the very light application to somewhat heavier work. Plus if i had to buy 1 bit, it would be an 8mm because it will have more common uses across different fixings.


  • Registered Users, Registered Users 2 Posts: 1,281 ✭✭✭rje66


    I have mine drilled dead centre and avoided the rebar. Luck, or not, I couldn't tell ya!

    This is the way to go...


  • Moderators, Home & Garden Moderators Posts: 6,378 Mod ✭✭✭✭Wearb


    Got it done. Drilled 2 holes in the centre, 500mm apart vertically. I think I might have gone in beside a bar on the bottom one, but managed to get a plug in there too.
    Thanks for all the advice.

    Please follow site and charter rules. "Resistance is futile"



  • Advertisement
Advertisement