If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Leak

White Clover · 2019-12-11 11:37:55

Hi lads, I have a leak under the floor of the hot press. It's the mains supply from the pump/well outside. The leak is at an old plasticTee joiner where the hydrodare Tee's off to the kitchen one side and the other side goes to the tank in the attic. The Tee is about 2 inches under the floor. I have it exposed, but I can't…

Options

11-12-2019 12:37pm

#1

White Clover

Registered Users Posts: 4,577 ✭✭✭

Join Date: December 2014

Posts: 4565

Hi lads, I have a leak under the floor of the hot press. It's the mains supply from the pump/well outside.
The leak is at an old plasticTee joiner where the hydrodare Tee's off to the kitchen one side and the other side goes to the tank in the attic. The Tee is about 2 inches under the floor. I have it exposed, but I can't expose any more of the pipe at either side due to kero lines and the wall.
I can see that the leak is at the Tee itself.
Would Tec 7 or some other sealer be worth a try to seal it?

1

Comments

Options
#2 14-12-2019 5:41pm
BDI

Closed Accounts Posts: 2,005 ✭✭✭

Join Date: August 2019

Posts: 1962

You could try it but I’m sure it’s likely that the leak will get worse and worse until it completely blows all over the place causing damage to all sorts.

Might save yourself a few quid getting a professional in.

0