Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

RF low battery SW 1070

  • 11-09-2019 10:48am
    #1
    Rooskey
    Registered Users, Registered Users 2 Posts: 8 ✭


    Hi, I getting the above fault on an alarm panel. The main alarm battery in the hotpress was changed last year so I assume this should be ok. Is there another battery in the user panel itself?

    Thanks.


Comments

  • #2
    Donnacha_
    Registered Users, Registered Users 2 Posts: 34 ✭Donnacha_


    You must have wireless devices attached to the system. its one of those batteries that is low.


  • #3
    Rooskey
    Registered Users, Registered Users 2 Posts: 8 ✭Rooskey


    Thanks for that. I thought all the sensors were hard wired but will double check.


  • #4
    Rooskey
    Registered Users, Registered Users 2 Posts: 8 ✭Rooskey


    I checked the alarm panel and after going through the Engineers menu found that the problem lies with the carbon monoxide sensor EI208. There is a sticker on it recommending that it be replaced this year. I was going to replace it with the same model but found some poor reviews about it online. Can anyone recommend a good place to find an alternative please? Thanks.


  • #5
    Donnacha_
    Registered Users, Registered Users 2 Posts: 34 ✭Donnacha_


    Reliable Security Products 01 8372445


  • #6
    Rooskey
    Registered Users, Registered Users 2 Posts: 8 ✭Rooskey


    Thanks Donnacha. I got a replacement EI208 and RF unit before I read your post. I installed them but the fault is still coming up on the alarm panel. I pressed the test button on the CO alarm and it worked ok. About every 5 seconds the red led comes on, then it changes to green then blue. Not sure why this is happening.


  • Advertisement
Advertisement