Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Pixelation on RTE 1

  • 11-08-2019 11:46PM
    #1
    Yamanoto
    Closed Accounts Posts: 5,489 ✭✭✭


    Hi Folks

    TV's in the lounge & the den are served by the same rooftop aerial.

    RTE 1 and +1 are the only channels experiencing picture breakup & only on the telly in the den. I've tried retuning the TV, checked connections on coax etc.

    Where to next in the process of elimination?


Comments

  • #2
    greasepalm
    Registered Users, Registered Users 2 Posts: 6,125 ✭✭✭greasepalm


    Funny i had the same issue and needed a booster fitted but later found out cable of good quality was faulty.


  • #3
    Digifriendly
    Registered Users, Registered Users 2 Posts: 4,130 ✭✭✭Digifriendly


    I am receiving signals from Clermont Carn and RTE1 and RTE 1 +1 as well as RTE2+1 and Virgin Media 3 are my weakest channels as they are on the weaker munltiplex (Ch56) while RTE2/Virgin Media 1/Virgin Media 2/TG4 (Ch52) are more robust.


  • #4
    greasepalm
    Registered Users, Registered Users 2 Posts: 6,125 ✭✭✭greasepalm


    Might need to change their service to ****view.


  • #5
    Yamanoto
    Closed Accounts Posts: 5,489 ✭✭✭Yamanoto


    I'm receiving signal from Mt. Leinster.

    If it were the coax, would that not effect more channels than RTE 1 & +1?


  • #6
    Antenna
    Registered Users, Registered Users 2 Posts: 2,444 ✭✭✭Antenna


    Go into tuning menu and see what UHF channel you are receiving the 'pixelated' channels from.

    Your TV might have retuned to a different transmitter with an inferior signal for some reason

    Mt Leinster should be 23 and 26 for both MUXs


  • Advertisement
  • #7
    greasepalm
    Registered Users, Registered Users 2 Posts: 6,125 ✭✭✭greasepalm


    Yamanoto wrote: »
    I'm receiving signal from Mt. Leinster.

    If it were the coax, would that not effect more channels than RTE 1 & +1?


    Mine was only on rte1 i had the issue and with 3 rock


Advertisement