Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all,
Vanilla are planning an update to the site on April 24th (next Wednesday). It is a major PHP8 update which is expected to boost performance across the site. The site will be down from 7pm and it is expected to take about an hour to complete. We appreciate your patience during the update.
Thanks all.

Picture but no sound through coaxial cable

Options
  • 08-04-2019 8:32pm
    #1
    Den Perry
    Registered Users Posts: 3 ✭


    New Toshiba smart tv. Picture and sound are fine through HDMI but just getting picture through coaxial cable from Sky box. Not a cable problem as it works fine on an older tv.
    Tagged:


Comments

  • Options
    #2
    The Cush
    Registered Users Posts: 15,479 ✭✭✭✭The Cush


    Den Perry wrote: »
    New Toshiba smart tv. Picture and sound are fine through HDMI but just getting picture through coaxial cable from Sky box. Not a cable problem as it works fine on an older tv.

    The Toshiba defaults to analogue TV standard PAL B/G instead of the UK/Ireland analogue TV standard PAL I, the Vision/Sound carrier spacing differs between the two, 5.5 MHz vs. 6.0 MHz. Try the following:

    Menu -> Settings -> Installation -> Manual Channel Scan -> Analogue -> Band C -> TV System I -> Select Channel or Frequency to scan -> OK


  • Options
    #3
    Den Perry
    Registered Users Posts: 3 ✭Den Perry


    The Cush wrote: »
    The Toshiba defaults to analogue TV standard PAL B/G instead of the UK/Ireland analogue TV standard PAL I, the Vision/Sound carrier spacing differs between the two, 5.5 MHz vs. 6.0 MHz. Try the following:

    Menu -> Settings -> Installation -> Manual Channel Scan -> Analogue -> Band C -> TV System I -> Select Channel or Frequency to scan -> OK

    Spot on The Cush, Fair play to you. TV is back in action. Thanks again.


Advertisement