Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

12mm copper pipe for bath connections

  • 15-02-2019 10:25pm
    #1
    rodge123
    Registered Users, Registered Users 2 Posts: 1,480 ✭✭✭


    Bought a freestanding bath tap and father-in-law is installing for me.

    He reckons the copper pipe they supplied is very short and going to be difficult to work as per their drawings.
    Pipe supplied is 12mm with 12/15mm adapters.
    They only supplied 200mm of the pipe, so will have to be cut into 2 x 100mm.

    See page 4, diagram A3.
    https://assets.vandabaths.com/wp-content/uploads/2014/03/21092614/TU14-15_EU-US_issH_15-02-2018.pdf

    Going by that - 50mm to bring up from ground and allow another 30/40mm above tile...that leaves 10/20mm for bend and connector.

    Anyone know where we could get 12mm copper around Meath/Kildare border or even Dublin?

    473281.png

    Thanks


Comments

  • #2
    DublinDilbert
    Registered Users, Registered Users 2 Posts: 5,401 ✭✭✭DublinDilbert


    What’s the normal way to connect onto the 15mm, solder or compression fitting?

    I’d probably solder onto it if there’s no space, or use a 1/2 compression fitting with the olive changed to 15mm..


  • #3
    jhenno78
    Closed Accounts Posts: 208 ✭✭jhenno78


    A better approach might be to get some 15mm pipe and elbows.
    Solder on your 12mm>>12to15mm adapter>>15mm pipe (all vertical). 15mm Elbows at the bottom
    Then 15mm pipe coming out from the elbows for a bit and attach a 15mm to 1/2" adapter(or 16mm alupex), then out to your normal plumbing.

    You'll need to mount the support for your pipework a little further down, but there should be plenty of room in the floor.

    Now, you should have problems getting 15mm pipe and fittings locally too, but it shouldn't be nearly as bad. Worst case scenario take a trip north of the border or order online.


Advertisement