Unusual internal door hardware

Calahonda52

Pic one shows a hollow brass rod, threaded internally, that passes through the lock like the one in the link below: it has two M4 or similar, pozi-1 bolts that thread in from both sides and tighten up the lot, with no need for grub screws through the handle into the square bar. [I had to clip the heads off the bolts to get the piece out as the threads are stripped inside the brass rod

https://www.manomano.co.uk/internal-door-lever-door-handles/hafele-plain-safety-lever-door-handles-aluminium-1-pair-20mm-2614720

Any thoughts on where I might source the kit.
Thanks as always

dok_golf

If you email Karl Henry at The Door Centre in Galway, he should be able to sort you. He's very good at sourcing what the customer wants

Bonzo Delaney

There's a similar set up on all the euro spec handles
It's a male / female set up as opposed to what you have of two screws in to either side of an internally threaded sleeve .
Any local hardware should have boxes of these handles.
They might give you a packet out if a sample box if you ask nicely .
Was in a similar situation myself and the store gave me a few packets they had lying around .

Who2

Doors plus floors north road finglas. I know they used to sell those handles and hardware.