Digi dialler

mozil

Hi looking for a bit of help setting up a Digi dialler
Model is smart guard E18SGGSM
Basically been playing around with this on and off for a month or so but can't get it to work.
I just want to hook it up to house alarm.

Have it rigged up to a temp 12v supply. Installed an Eir sim
Powerd up and I'm getting a led flash that indicates device has connected to network but when I send the configuration text or status text I get no reply from unit.
I have the sim set to 2g only and pin disabled am I missing anything else?? Or is it a faulty unit

It was previously installed elsewhere in working order

altor

mozil wrote: »

Hi looking for a bit of help setting up a Digi dialler
Model is smart guard E18SGGSM
Basically been playing around with this on and off for a month or so but can't get it to work.
I just want to hook it up to house alarm.

Have it rigged up to a temp 12v supply. Installed an Eir sim
Powerd up and I'm getting a led flash that indicates device has connected to network but when I send the configuration text or status text I get no reply from unit.
I have the sim set to 2g only and pin disabled am I missing anything else?? Or is it a faulty unit

It was previously installed elsewhere in working order

Just had a quick look at the manual off that and it says once powered up it needs the correct time and date set for it to operate correctly.
Hopefully thats all it is as never used that gsm.

mozil

altor wrote: »

Just had a quick look at the manual off that and it says once powered up it needs the correct time and date set for it to operate correctly.
Hopefully thats all it is as never used that gsm.

No have sent the configuration text to the sim once it's powered up but when you send a request status message I get no reply

altor

mozil wrote: »

No have sent the configuration text to the sim once it's powered up but when you send a request status message I get no reply

Have you reset the unit before you installed it?

mozil

altor wrote: »

Have you reset the unit before you installed it?

Fair play altor thought I had but gave it another try
reset button before powering up
Getting replys now when sending config text for time and date but unfortunately getting an error message in return

altor

mozil wrote: »

Fair play altor thought I had but gave it another try
reset button before powering up
Getting replys now when sending config text for time and date but unfortunately getting an error message in return

Whats the error?

mozil

altor wrote: »

Whats the error?

It just says "CLK ERROR"
Submitting it in the form
CLK:2019.01.01_19:58

As it says in the manual

altor

mozil wrote: »

It just says "CLK ERROR"
Submitting it in the form
CLK:2019.01.01_19:58

As it says in the manual

Format of the text looks correct.
Have you sent up phone number one to the unit?

mozil

altor wrote: »

Format of the text looks correct.
Have you sent up phone number one to the unit?

Yes I believe so altor

altor

mozil wrote: »

Yes I believe so altor

Can you trigger the unit to see if you get a text?

mozil

Ave hooked it up altor
Off the internal bell but doesn't seem to trigger

altor

mozil wrote: »

Ave hooked it up altor
Off the internal bell but doesn't seem to trigger

What way have you it hooked up?

mozil

altor wrote: »

What way have you it hooked up?

Took the 12V off the alarm panel auz 12v supply

Have the z1of Digi dialler going to the + of internal bell
And the com of Digi dialler to - of internal bell
Thanks altor!

altor

mozil wrote: »

Took the 12V off the alarm panel auz 12v supply

Have the z1of Digi dialler going to the + of internal bell
And the com of Digi dialler to - of internal bell
Thanks altor!

Just looking at the diagram and it looks like this to me.
Z1 to the minus on the internal bell.
12V to 12V from panel.

Have you turned on the input also?

mozil

altor wrote: »

Just looking at the diagram and it looks like this to me.
Z1 to the minus on the internal bell.
12V to 12V from panel.

Have you turned on the input also?

Fair play for the help altor
Gave that a shot no joy
Yes have turned the input on and have tried both no nc

altor

mozil wrote: »

Fair play for the help altor
Gave that a shot no joy
Yes have turned the input on and have tried both no nc

Just on the powering of the device.

You have 12V positive going to the DC
12V minus going to the COM

Text message to unit, SAZ1:ON

mozil

altor wrote: »

Just on the powering of the device.

You have 12V positive going to the DC
12V minus going to the COM

Text message to unit, SAZ1:ON

Correct as above

Ah could just be a dud altor

altor

mozil wrote: »

Correct as above

Ah could just be a dud altor

From the diagram it seems wired correctly.
You could switch it to input 2 and test that to be sure.
Never used the unit so could be missing something myself also