Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Problem with Zanussi 6kg combination washing/dryer

  • 06-12-2018 10:45PM
    #1
    Eod100
    Registered Users, Registered Users 2 Posts: 12,461 ✭✭✭✭


    Hi,

    I'm having trouble with a Zanussi 6kg combination washing/dryer. It's not drying clothes properly and seems to be excess water building up from filter. Have taken out filter and cleared it few times now. Clothes are still sopping wet after a dry cycle. Error message E20 comes up. Anyone experience this before and/or know how to fix?

    Thanks a lot for any help in advance!


Comments

  • #2
    The Red Ace
    Registered Users, Registered Users 2 Posts: 1,399 ✭✭✭The Red Ace


    when doing a drying cycle you need to remove approx. half the wash load


  • #3
    Eod100
    Registered Users, Registered Users 2 Posts: 12,461 ✭✭✭✭Eod100


    The Red Ace wrote: »
    when doing a drying cycle you need to remove approx. half the wash load

    Never has issued up to now so it's not that


  • #4
    The Red Ace
    Registered Users, Registered Users 2 Posts: 1,399 ✭✭✭The Red Ace


    E20 indicates a pump problem, it may be a worn/sticking pump or a blockage in the emptying hoses. You haven't mentioned having an emptying problem during the washing cycle where the issue should also present itself. As a diy test set the machine to drain with the filter removed and press the start/pause button several times while observing the pump impellar, if it sticks the pump needs replacing. make sure you re fit the filter after testing


Advertisement