WTD Stem, Handlebar, Chainset

Bambaata

Looking for a few bits to finish a bike build

Stem - Trying to find a 0 or +/-3 degree 31.8 stem. Open to whatever material and whatever price point as its difficult to locate a 0 or 3. Been having back issues the past while and my exisitng +/- 7 is too low in - setting and too high in + setting so am thinking a 0 or 3 should work

Handlebar - 42cm. Again open to price points/materials to match above. some good deals on websites but am open to 2nd hand as this is a spare spare bike, being built for hilly days of Ras!

Chainset - looking for a 10speed 52-36 172.5/175 for said hilly days. Can get a new 105 cheap enough but again this bike will have feck all use so looking 2nd hand in at least a 105. Seems 11 speed will also work ok too from the little reading ive done?

Rotor 54 or 55 Q-Ring 130BCDThis is a long shot! Looking to get a bigger ring for any potential tail wind days of Ras! Was advised by experienced Ras rider to get a BIG ring for a little insurance if we get a tailwind day. Aero or ordinary

Am based in Dublin but will be Galway direction this weekend and Mayo direction May BH weekend

joey100

I have a never used FSA gossamer 172.5, 52-36.



You can have it if you want, can bring it into work and meet you some time next week if it suits. Thing has been sitting in the shed for the last year, be glad to see it being used!

Edited to add, it's a BB30, taken off a supersix.

Bambaata

Thanks Joey!! Very kind, its for my own Supersix but ive just had BB for Shimano pressed into the BB. Will need to check if the BB i got will work with that!

joey100

No bother, sure let me know!

koutoubia

Bambaata wrote: »

Handlebar - 42cm. Again open to price points/materials to match above. some good deals on websites but am open to 2nd hand as this is a spare spare bike, being built for hilly days of Ras!

http://mercatino.bdc-mag.com/p-164327-Piega-Manubrio-Scor-Race-(marchio-BMC)


Have a set of these in 42. (dont ask about the link its what came up in google image search).
More then welcome to them. JUst cover post or parcel motel if you cant pick up.

ckeego

Hi there.
I have a Ritchey WCS 42mm bar in gloss black.

As new, just changed for a set of carbon bars. Say 50 euro?

Also have a wing bar (full carbon, FSA) again 42mm. Used but in good condition. 40 euro.

Loads and loads of stems, but no +/- 3!!!

Bambaata

Hey ckeego, could you send me pics of the FSA wing bar? Also might you be able to send a link of them online so im not looking at the wrong one? Just curious about reach and drop so was trying to find them online but can only see a "pro" version. That them?

And thanks koutoubia, ill see how i get on here with ckeego

ckeego

Bambaata wrote: »

Hey ckeego, could you send me pics of the FSA wing bar? Also might you be able to send a link of them online so im not looking at the wrong one? Just curious about reach and drop so was trying to find them online but can only see a "pro" version. That them?

And thanks koutoubia, ill see how i get on here with ckeego

Will do..
Just give me a day or 2 as I'm on the road at the mo..

ckeego

Took the bar tape off this.. Not as cosmetically sound as I thought, but outside of that a great bar.

ckeego

Took the bar tape off this.. Not as cosmetically sound as I thought, but outside of that a great bar.

Bambaata

Thanks ckeego, would you happen to have a picture to show? I assume functionally it is fine, not crashed, no gashes etc?

ckeego

Here you go..

No crashes, all sound.

Once bar taped, it will look fine, but couldn't charge you 50 for it-let's say 30.

Bambaata

Cool, 30 it is. Where suits to meet/collect?

ckeego

I'll be at the Vets race tomorrow in Dunsany, so either there or along the route?

Up around Sandyford this aftrenoon..

PM your number and we will arrange.

Many thanks.

Bambaata

Almost there now, am sorted for seatpost, bars, Q-ring - unfortunately I believe the FSA wont work with the PF4624 i have in the bike so thanks Joey but ill have to pass, anyone got a 105 or ultegra 52-36 which is surplus to requirements?

Also in he look out for Look Keo 2 Max Blade pedals if anyone has any?

bsb1971

@ckeego I'll take the fsa wing bars if u still want to sell them, also would you have a 100mm stem to go with it (doesn't need to be carbon). Sorry for hijacking but see they won't work for you, bambaata.

ckeego

I don't think it is the wing bar that doesn't work for him!

Bambaata

Yup taking the wing bar im afraid

bsb1971

No bother. Enjoy!