Wanted: 165mm crankset (130bcd)

Statler

Looking for an 11 speed double crankset, ideally 165mm crank length but if all else fails 170mm might do. And now for the tricky bits that make it a long shot.... Must be standard 130bcd not compact, condition of chainrings unimportant, but I'm looking for a decent enough crankset. It's going to ge getting a P2max power meter stuck onto it so it can't be Shimano, must be FSA, Rotor, Sram, possibly Specialized or Canondale.

CramCycle

I have 105 Shimano ones at home (165mm), cranks are in near new condition. Will check on the chainrings condition.

Statler

Shimano crankarms won't work with a power2max, thanks anyway!

CramCycle

Statler wrote: »

Shimano crankarms won't work with a power2max, thanks anyway!

Sorry missed the second sentence.

Zippe

Statler wrote: »

Looking for an 11 speed double crankset, ideally 165mm crank length but if all else fails 170mm might do. And now for the tricky bits that make it a long shot.... Must be standard 130bcd not compact, condition of chainrings unimportant, but I'm looking for a decent enough crankset. It's going to ge getting a P2max power meter stuck onto it so it can't be Shimano, must be FSA, Rotor, Sram, possibly Specialized or Canondale.

Hey,

I’ve a rotor 24mm axel chainset, there 170 crank arms, if your fitting a P2M you will be removing the spider, I have the tool to do this and I can loan it to you, they have 130 bcd aero spider at the moment, there as new, I had them on my tt bike for 2 x 16k TT’s, wrong size cranks for me,
Cheers zip,

Quigs Snr

I have a set of 170mm Rotor 3D30 cranks, with a Power2Max Type S, Rotor Aero Rings 53x36 (110 BCD)... so similar to what you are ultimately shooting for, but otherwise exactly NOT what you are looking for !

Statler

Zippe wrote: »

Hey,

I’ve a rotor 24mm axel chainset, there 170 crank arms, if your fitting a P2M you will be removing the spider, I have the tool to do this and I can loan it to you, they have 130 bcd aero spider at the moment, there as new, I had them on my tt bike for 2 x 16k TT’s, wrong size cranks for me,
Cheers zip,

Could be just what I'm looking for, am I correct in thinking this will work with a BB30 bottom bracket? BB standards confuse the hell out of me to be honest! I have the spider tool so all good there!

Statler

Quigs Snr wrote: »

I have a set of 170mm Rotor 3D30 cranks, with a Power2Max Type S, Rotor Aero Rings 53x36 (110 BCD)... so similar to what you are ultimately shooting for, but otherwise exactly NOT what you are looking for !

Has to be a 130BCD crankset for what I'm trying to do, but duly noted as a backup plan, so I may well get back to you!

Zippe

Statler wrote: »

Could be just what I'm looking for, am I correct in thinking this will work with a BB30 bottom bracket? BB standards confuse the hell out of me to be honest! I have the spider tool so all good there!

Hey,

You can get the conversion BB for the BB30 to work with 24mm but not the other way around, I have road bike with sram etap and I fitted the gxp chain set so it wouldn’t restrict me swapping to another bike down the road, with the 24mm you can swap it to any winter training bike by using the standard shimano BB

Cheers

Statler

Zippe wrote: »

Hey,

You can get the conversion BB for the BB30 to work with 24mm but not the other way around, I have road bike with sram etap and I fitted the gxp chain set so it wouldn’t restrict me swapping to another bike down the road, with the 24mm you can swap it to any winter training bike by using the standard shimano BB

Cheers

Okay, might be what I'm after then, what would you be looking for?

Quigs Snr

Zippe wrote: »

Statler wrote: »

Could be just what I'm looking for, am I correct in thinking this will work with a BB30 bottom bracket? BB standards confuse the hell out of me to be honest! I have the spider tool so all good there!

Hey,

You can get the conversion BB for the BB30 to work with 24mm but not the other way around.

Cheers

NOT relevant for the OP... but you can.. it depends on your bike and your bb standard e.g a bsa can take a bb30 with this : https://www.sigmasports.com/item/Rotor/BSA-Bottom-Bracket-to-BB30-Steel-BSA/10QE

... of course my latest addition to the collection is bb90 and its one of the very few that my spare bb30 Quarq dfour and the bb30 p2m won't fit into.

Also Starlet.. if you are getting a p2m anyway you are just looking for crankarm... spider bcd of the donor crank don't matter .. they are coming off anyway. Speaking of which I should have a couple of rotor spiders in various bcd.

Statler

Quigs Snr wrote: »

...........

Also Starlet.. if you are getting a p2m anyway you are just looking for crankarm... spider bcd of the donor crank don't matter .. they are coming off anyway. Speaking of which I should have a couple of rotor spiders in various bcd.

Ah, that's bit of a Homer Simpson "DOH!" moment for me right there... I already have the p2m, just looking to shorten my crank length on a TT bike... Thanks...

Edit: What I have is the p2m, and Rotor chainrings in BCD130, so I think all I really need is a crankset/spider without chainrings, in 165 to 170mm...

Zippe

Quigs Snr wrote: »

NOT relevant for the OP... but you can.. it depends on your bike and your bb standard e.g a bsa can take a bb30 with this : https://www.sigmasports.com/item/Rotor/BSA-Bottom-Bracket-to-BB30-Steel-BSA/10QE

... of course my latest addition to the collection is bb90 and its one of the very few that my spare bb30 Quarq dfour and the bb30 p2m won't fit into.

Also Starlet.. if you are getting a p2m anyway you are just looking for crankarm... spider bcd of the donor crank don't matter .. they are coming off anyway. Speaking of which I should have a couple of rotor spiders in various bcd.

Just an idea
I take it you’ve a Trek ? You sell your bb30 to op and you take mine, I had these on my 9.9 speed concept, if all you need is crank arms for bb90 and he needs crank arms for bb30, everyone wins :-)

Zippe

I’m looking for rotor 175’s myself

Truffle

i have sram apex 165mm 130bcd GXP. 53/39 if it suits

and 170mm sram rival, gxp,130bcd, 53/39

Statler

Apologies I should have updated this, I got sorted on ebay, went with 170mm in the end, I may get back to you re the 165mm though if that doesn't work out...