Custom Upgraded G36 - Electric Blow Back with Red Dot - High ROF

Real_Greg

Custom Upgraded G36 - Electric Blow Back with Red Dot - High ROF - €210

For sale goes mine spare gun. It started as D-Boys G36C Electric Blow Back and then gun have been completely rebuild and upgraded.
Power - 0.95 Jule (320 FPS on 0.2 BB's)

Following components have been installed:
• D-Boys G36C EBB €120
• MERF 3.2 Mosfet €45
• Huarder High Torque Motor €45
• Hi Speed Gears 13:1 €25
• Prometheus Stainless Steel Precision TB Barrel 6.03mm/285mm €60
• IDZ G36 carry handle with flip up sights €30
SCAR Stock €35
• Swiss Armss red dot €40
• Airsof Pro CNC Hop Up Chamber €35
• Airsoft Pro CNC o-ring sealed air nozzle
• Low resistance wiring
• MOE Front grip
TOTAL: over €435.

Gun have been fully upgraded to outperform more expensive air rifles. Only few stock parts are still left in this rifle.
Gearbox had been re-shimmed and regressed and AOE has been corrected. Gun currently generates between 25RPs and 40RPs (fully adjustable) on 11.1 Lipo battery.
Original top rail have been replaced with IDZ style carry handle with flip up sights, original scope have been replaced with Swiss Arms 40mm red dot.
Red dot is fully adjustable for windige and elevation. Gun have been camo painted and paint job had been secured with layer of clear lacquer to make sure it will not peel off quickly.

Rifle in current configuration is very accurate as 285 Prometheus stainless steel barrel and Airsoft Pro CNC hop up chamber have been installed. Flat Hop Up mode have been made.
Hop up chamber had been reassembled and new clear Guarder Hop-Up bucking (soft type) have been installed - modified as flat hop up. Accuracy and range have increased and is very decent. Hop Up chamber have been modified to fit ARES style of the G36 guns.
Electric Blow back has been disabled to cope with high rate of fire but it takes less than 5 minute to activate it.
Gearbox has a quick spring change system - remove one pin to remove stock and then change spring - takes less then 3 minutes.

Gun comes with one standard M4 Hi-cap magazine and with M4 magazine well, I will also add standard G36 magazine nest as well.
In current configuration rifle have been only skirmished once to confirm that it is working fine. I am also adding 3 magazines Mag 120bb's mid-cap magazines visible on pictures and 7.4 lipo battery.

Rifle have been fitted with fully adjustable MERF 3.2 mosfet so bot mode of fires and ROF can be full adjustable.
Semi-Burst-Auto. Burs can be st up between 2 and 10 rounds per pull of triger.

I will olso ad some original parts like original barrel, motor and top rail.



I am based In Bray. I will accept PayPal. I will post of buyer will pay for postage.
If someone is interested I can put a video of the gun being tested on chrono.

Links to some of the instaled parts bellow:
https://www.evike.com/products/24383/
https://airsoftpro.cz/en/gun-parts-upgrade/kompletni-cnc-hopup-komora-pro-serii-g36-detail?showall=1
https://shop.ehobbyasia.com/catalog/product/view/id/3994/s/guarder-infinite-torque-up-short-type-motor/
https://gunfire.pl/product-eng-1152200760-Mosfet-Gate-MERF-3-2-unit.html
https://gatee.eu/products/programmable/merf-32

xxDSOFWxx

Still for Sale?

Real_Greg

Yes it is still available.
Are you interested?