Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Log splitter advice

  • 18-02-2018 4:33pm
    #1
    Registered Users, Registered Users 2 Posts: 34


    Well all, I have about ten to fifteen trees cut down and need to split them soon. I'm wondering what would the best log splitter to purchase just don't have a lot to spend either. I have a david brown 885 and don't know if the hydraulics on it would be good enough, would also have to put a return pipe on it. I was thinking about a pto driven one you'd be looking at around 1200 for one of them,but I'm thinking the tractor would work that fine,or has anyone any experience of a petrol one, are they as good, appreciate any help, thanks


Comments

  • Registered Users, Registered Users 2 Posts: 73,520 ✭✭✭✭colm_mcm


    You can rent a self propelled one for €70 a day, is it worth paying so much to buy one?


  • Registered Users, Registered Users 2 Posts: 34 Househunter16


    colm_mcm wrote: »
    You can rent a self propelled one for €70 a day, is it worth paying so much to buy one?

    This is also true, did think of this but I hope to cut a few more down this year, I could get a petrol one for around a 1000,it would always be there if you needed it or else sell it when all is done.


  • Registered Users, Registered Users 2 Posts: 14,907 ✭✭✭✭CJhaughey


    Hartnett products in Cork have a good range of splitters, from small electric ones to PTO type ones, not bad pricewise.
    https://www.hartnett-products.ie/


  • Registered Users, Registered Users 2 Posts: 607 ✭✭✭larthehar


    https://www.donedeal.ie/otherfarmmachinery-for-sale/mb-16ton-log-splitter-heavy-duty/10725669

    If you are keep the browne.. you would pick up a second hand one cheaper on done deal..


  • Registered Users, Registered Users 2 Posts: 34 Househunter16


    larthehar wrote: »
    https://www.donedeal.ie/otherfarmmachinery-for-sale/mb-16ton-log-splitter-heavy-duty/10725669

    If you are keep the browne.. you would pick up a second hand one cheaper on done deal..

    Do ye think the David Brown hydraulics would be quick enough for this splitter, or would a pto one be better, thanks


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 94 ✭✭TwoOldBoots


    If the trees are hardwood then you should be able to split the logs yourself with an Axe. Just keep the logs short and you should be able to work away.
    If the trees are those evergreen yolks then you'll need a hydraulic splitter


  • Registered Users, Registered Users 2 Posts: 11,123 ✭✭✭✭patsy_mccabe


    Do ye think the David Brown hydraulics would be quick enough for this splitter, or would a pto one be better, thanks

    First off, the presure relief valve on the David Brown 885 is set at 2000 psi (138 Bar). So the shop manual says anyway.
    The flowrate from the hydraulic pump is 28 litres per minute.
    http://www.tractordata.com/farm-tractors/000/4/1/410-david-brown-885.html

    It's better not to have the pressure maxing out on the tractor valve, so putting a valve on the logsplitter set lower, at say 120 Bar would be better.

    Forces would be for different size cylinders, at 120 Bar;
    3" - 5.6 Tonne
    3.5" - 7.6 Tonne
    4" - 9.9 Tonne

    Advance times for a 12" stroke would be;
    3" - 3.1 secs
    3.5" - 4.2 secs
    4" - 5.4 secs

    So a larger bore size cylinder would be higher force but slower speed.


  • Registered Users, Registered Users 2 Posts: 1,018 ✭✭✭L1985


    CJhaughey wrote: »
    Hartnett products in Cork have a good range of splitters, from small electric ones to PTO type ones, not bad pricewise.
    https://www.hartnett-products.ie/
    We got one of the electric ones-its good will split anything but it's on the slow side and you would need 2ppl working it.works fine if it's just yourself your splitting for


  • Registered Users, Registered Users 2 Posts: 34 Househunter16


    First off, the presure relief valve on the David Brown 885 is set at 2000 psi (138 Bar). So the shop manual says anyway.
    The flowrate from the hydraulic pump is 28 litres per minute.
    http://www.tractordata.com/farm-tractors/000/4/1/410-david-brown-885.html

    It's better not to have the pressure maxing out on the tractor valve, so putting a valve on the logsplitter set lower, at say 120 Bar would be better.

    Forces would be for different size cylinders, at 120 Bar;
    3" - 5.6 Tonne
    3.5" - 7.6 Tonne
    4" - 9.9 Tonne

    Advance times for a 12" stroke would be;
    3" - 3.1 secs
    3.5" - 4.2 secs
    4" - 5.4 secs

    So a larger bore size cylinder would be higher force but slower speed.
    Thanks to all for the reply, I'm thinking maybe the 12 ton pto driven one could be the best, it runs at 1500 revs, the browne would be well able for that I'd say.


  • Registered Users, Registered Users 2 Posts: 831 ✭✭✭satstheway


    Thanks to all for the reply, I'm thinking maybe the 12 ton pto driven one could be the best, it runs at 1500 revs, the browne would be well able for that I'd say.

    We have a tractor one here and its a good job. But the neighbours bought a small electric one and its just as good. U should hire one out for a day to see what u think.
    It looks a bit like this


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 6 LiveWell


    We have a 40 Ton petrol one from Hartnett Products in Cork as well and it's a brilliant machine. Very versatile. Highly recommend. They have smaller petrol ones too


Advertisement