Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Help me Choose 360mb Wireless Router

  • 04-10-2017 10:23am
    #1
    Registered Users, Registered Users 2 Posts: 67 ✭✭


    Hi All
    So I am upgrading Virgin 240mb to 360mb service
    Current Set Up is a Thompson Wireless Router With 2 Antennae (5 years Old)
    My main aim is to mainly increase the Coverage area and get faster speeds on all our devices
    Options are
    Keep the 5 year Old Thompson (has never given any trouble in fairness Very Stable)
    Virgin Media Hub (Free with upgrade)
    TP-Link AC2600
    Archer c9
    NETGEAR R6400 (looks Cool)
    I dont mind spending a few quid if I get speed and good coverage thanks :)


Comments

  • Registered Users, Registered Users 2 Posts: 36,170 ✭✭✭✭ED E


    Take the hub, it can be bridged to your own router easily unlike the Thompson (you cant keep the Thompson with 360 anyways).

    Use SmallNetBuilder for reviews on your prospect devices.


  • Registered Users, Registered Users 2 Posts: 8,755 ✭✭✭degsie


    Out of interest, do VM automatically put you on ipv6 if you upgrade?


  • Registered Users, Registered Users 2 Posts: 36,170 ✭✭✭✭ED E


    degsie wrote: »
    Out of interest, do VM automatically put you on ipv6 if you upgrade?

    Yep.

    Install
    Wait 10 minutes
    Call VM, turn DSLite off
    When its removed, Reset Hub


  • Registered Users, Registered Users 2 Posts: 67 ✭✭Lostphrophet


    thank you kindly ED!
    Should i expect increased coverage and speed over the Thompson? Allways very nervous leaving something that never let me down for so long. Im old skool that way.

    Just goes to show what the VM staff know the woman i spoke to said you can keep your Thompson for the 360MB wont make any difference as it has two aerials lol


  • Registered Users, Registered Users 2 Posts: 67 ✭✭Lostphrophet


    IPV6 now im lost.... i take it thats good :P


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 67 ✭✭Lostphrophet


    ED E wrote: »
    Take the hub, it can be bridged to your own router easily unlike the Thompson (you cant keep the Thompson with 360 anyways).

    Use SmallNetBuilder for reviews on your prospect devices.


    Virgin Media Hub ordered Wooo! Cheers Mate


  • Registered Users, Registered Users 2 Posts: 36,170 ✭✭✭✭ED E


    Mr.S wrote: »
    Is there any reason to not be on IPv6?

    None.
    Mr.S wrote: »
    Is there any reason to not be on IPv6DSLite?

    YES!


  • Registered Users, Registered Users 2 Posts: 36,170 ✭✭✭✭ED E


    Mr.S wrote: »
    Why should you request to be taken off it?

    Double NAT. Bridging (which you may as well do if you're purchasing a €150 router).


  • Registered Users, Registered Users 2 Posts: 23 gtaking111


    ED E, Do you know if the newer Compal modem supports multiple routers in bridge mode like the old Cisco EPC 3925 does? I was going to upgrade to the 360 but they said I had no choice but to take the new modem so I refused for now.

    I've kept the same IP's for over a year now and it's nice to have a separate network for guests / CCTV which is why I am reluctant to take the upgrade, thanks.


  • Registered Users, Registered Users 2 Posts: 36,170 ✭✭✭✭ED E


    Yes it does. I've my LAN on one address and a totally isolated SamKnows box on another. You can lease at least 3 addresses.


    The process you go through will end up releasing that IP back to the pool and chances are you'll lose it. Thats where No-IP or DynDNS come in.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 67 ✭✭Lostphrophet


    ED E wrote: »
    Take the hub, it can be bridged to your own router easily unlike the Thompson (you cant keep the Thompson with 360 anyways).

    Hi Edd:

    Thanks for advise

    So to report:

    Replaced the UPC Thomson 870 router with the Virgin media Hub. Its in the exact same location but have definitely noticed a substantial reduction in wifi range. Used to get signal in full house now it cuts off at at about 70% of the previous range. Is the Virgin Hub just bad at range?:confused: If I use as you were saying above the VM Hub as a Modem / switch and bridge it to a new Wireless router what would be the BEST (range wise) wireless modem to attach to it to get maximum range. Strangely enough no wireless router really mention range at all
    Nearest mention of range is on the TP link (6 Antennas for Fully Expanded Coverage) Cheers :cool:

    ASUS DSL-AC68U Wireless Modem Router - AC 1900, Dual-band
    TP-Link Dual Band Wireless Gigabit Router | Black

    http://www.pcworld.ie/Product/asus-dslac68u-wireless-modem-router-ac-1900-dualband/324335/402.0.0


    http://www.harveynorman.ie/computing/networking-and-connectivity/modems-routers/tp-link-wireless-dual-band-gigabit-router-ac1750-archerc7.html


  • Registered Users, Registered Users 2 Posts: 7,157 ✭✭✭srsly78


    To fix coverage problem you want 2 wifi routers at either end of house, with overlapping coverage. Connect them via ethernet cable.

    Don't mind how many antennas it has or whatever, a single router will only reach so far.


  • Registered Users, Registered Users 2 Posts: 67 ✭✭Lostphrophet


    Cheers Seriously :) Might get a second hand Virgin media Hub to keep things simple and daisy chain that :cool:


  • Registered Users, Registered Users 2 Posts: 7,157 ✭✭✭srsly78


    Nah fsck that yoke. For your second wifi router you don't need something with dsl/cable functionality - just a barebones wifi router. Just set the passwords/encryption the same on both and your clients should seamlessly move from one to the other as needed.


  • Registered Users, Registered Users 2 Posts: 67 ✭✭Lostphrophet


    srsly78 wrote: »
    Nah fsck that yoke. For your second wifi router you don't need something with dsl/cable functionality - just a barebones wifi router. Just set the passwords/encryption the same on both and your clients should seamlessly move from one to the other as needed.

    Thats great Information mate I figured adding a second wifi point would mean interference and extra passwords etc. but that seems cool. By any chance would my original Thompson do? Even though it wasnt able to handle the 360MB coming in? If daisy chained off the VM Hub will that work? If not will get a decent one in PC world
    Cheers for Input :cool:


Advertisement