WTD: 11spd bits & bobs

MojoMaker

Upgrading a couple of bikes from 10 to 11spd before the winter sets in so I'm on the lookout for chainsets, shifters, mechs, and possibly brakes.

Ideally 5800 or 6800 but if some 9000 bits are out there I'm interested too.

In chainsets I'm looking for 52/36t and 170 or 172.5 arms

Ideally black bits but I'll run the eye over anything - silver or grey.

If anyone is interested I will have 6600 and 6700 bits available if the above come through.

boomdocker

I'd be intersted in the 6600/6700 bits if you get sorted

MojoMaker

Let's stay in touch boomdocker. I have 6700 FD & RD ready to go now actually.

Seadin

MojoMaker wrote: »

Upgrading a couple of bikes from 10 to 11spd before the winter sets in so I'm on the lookout for chainsets, shifters, mechs, and possibly brakes.

Ideally 5800 or 6800 but if some 9000 bits are out there I'm interested too.

In chainsets I'm looking for 52/36t and 170 or 172.5 arms

Ideally black bits but I'll run the eye over anything - silver or grey.

If anyone is interested I will have 6600 and 6700 bits available if the above come through.

I have ultegra 6800 170 arms for sale no chainrings. They have been used just twice on a TT bike. Perfect condition. Let me know if interested.

Political Wall Map

I have brand new 9000 levers and calipers if your interested. Levers are still in the box.

MojoMaker

Slightly too rich for me PWM, unless you'll come down a bit?

I would take a full 5800 group at this stage, or 5800/6800 mix.

Definitely want: 11spd road shifters, RD x 2, FD x 2.
Potentially want: 11spd chainset x 2 (I believe I can keep 10spd chainsets in play with an 11spd setup - note both are currently 5-arm spiders).

Seadin

MojoMaker wrote: »

Slightly too rich for me PWM, unless you'll come down a bit?

I would take a full 5800 group at this stage, or 5800/6800 mix.

Definitely want: 11spd road shifters, RD x 2, FD x 2.
Potentially want: 11spd chainset x 2 (I believe I can keep 10spd chainsets in play with an 11spd setup - note both are currently 5-arm spiders).

I have one 6800 RD taken off a TT bike lying around. Little use this year and bought new. I had sram shifters on the TT bike so the indexing didn't work too well with the 6800 RD. Let me know if that is of interest to you.

MojoMaker

It is yep, what would you look for it?

LollipopJimmy

6800 front (band on) and rear mech there in Dublin
I bought them here but then picked up some DA 9000 at the right price so letting them on

MojoMaker

I'll take both of those Lollipop. I'll send you a PM.

Will PM you as well Seadin.

MojoMaker

Thanks Lollipop - pleasure.

Ok so 1 x RD and 1 x FD painlessly off the list already.

Political Wall Map

5800 calipers, front and rear mech if you want them.... black.... calipers need new pads....

MojoMaker

Good stuff PWM.

What age on those components? Is the FD braze- or band-on?

Coming together nicely. Just shifters remaining.

Political Wall Map

MojoMaker wrote: »

Good stuff PWM.

What age on those components? Is the FD braze- or band-on?

Coming together nicely. Just shifters remaining.

I am not sure.... i got them off a guy last week as a part excahnge but have decided not to use them

They are clean though

MojoMaker

I'd take the FD if braze-on. Will pm to arrange.